The hinge switch SHS3Z offers great flexibility in installation, connection, and adjustment. Since the hinge switch is directly integrated into the protective device, it provides increased protection against tampering. The SHS3 can be used on all doors, hoods, and flaps and can be mounted on the right or left. The switching point of the safe hinge switch can be freely adjusted over the entire pivot range from 0° to 270°. An integrated fine adjustment screw allows for the switching point to be readjusted by +/- 1.5°. Thanks to the included replacement kit, the switching point adjustment can be repeated as often as needed when the system is expanded. Since a blank hinge with an identical design is also available, conventional load hinges can be omitted. It is a safe, complete solution for rotating protective devices with hinges, including hinge and safety switch. With an IP67 protection rating, it is suitable for use in areas with heavy contamination. High tampering protection, as it is directly connected to the protective device. Load capacities of up to 1200N. The switching point can be freely set from 0° to 270° and later modified. Easy mounting on profiles. Simple readjustment via an integrated fine adjustment screw. Systems can be mounted on the right or left. Low maintenance requirements. Zinc die-cast hinge with integrated safety switch in a plastic housing.