The wall-mounted network cabinets of the Unique series have been designed for particularly comfortable and flexible network cabling. Thanks to the integrated hinge in the rear frame, the housing can be folded to the side when needed, allowing for easy installation work in the back cabinet area. Each cabinet features a sliding cable entry with a foam rubber seal on the roof. The rear panel and base plate are equipped with punched cable entries with plastic covers. Additionally, the rear frame is fitted with brush strips at the top and bottom. The roof chassis is also provided with a punched area for the installation of a fan module. Inside, a pair of galvanized 483 mm (19") profile rails, labeled with height units readable from both directions, are installed. These can be adjusted in depth. The rear frame also has a 483 mm (19") perforation. Each cabinet is a robust steel construction made from up to 1.5 mm thick steel sheet. The color finish is applied as an electrostatic powder coating in standard colors gray (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels, as well as a lockable and removable front door, enhance accessibility. A door hinge reversal can be performed. Wall mounting is done in two simple steps: the frame of the housing is screwed to the wall in any opening direction and then connected to the housing. With optionally available leveling feet or wheels, the wall cabinets of the Unique series can also be used as free-standing units.