19" network cabinet according to DIN 41494. Steel sheet housing with a screwed frame, completely pre-assembled, self-ventilated, and dismountable. Inside, front and rear 4 x 19" profiles (2 front, 2 rear-sided), galvanised and step-less depth-adjustable. Contrariwise numbering of rack units at the 19" profiles. Front door is perforated and 2-part. The front door features a 3-point turning handle (up to 24U 1-point), is lockable, and includes a profile half-cylinder according to DIN 18252 / EN 1303. The profile half-cylinder is exchangeable by the customer (30/10 mm). The rear door is steel, 1-part, shortened, with 2 x latch locking (lock equal to door lock), and has a 3U panel for cable entry below (690 x 67 mm). Door stop for front and rear door is possible left- or right-sided. Detachable side walls with 2 x latch locking (lock equal to the door lock). Cabinets are stackable side-by-side with and without removal of the side walls, baying set available. Roof and bottom have 4/6 pre-punched openings for cable entry (450 x 90 mm); for 600 mm cabinet width, cable entry is only at the rear. The roof is prepared for accommodation of 2-fan or 4-fan units, and the bottom has a pre-punched opening for filter or cable entry modules. Internal earthing of all cabinet sections is included. A pre-assembled earthing bar is located rear-sided in the middle of the cabinet (ports: 2 x M5 + 2 x 8 mm). Maximum load is 1000 kg (depths 600 / 800 mm) or 1360 kg (depths 1000 / 1200 mm for >24U). Paint finish is RAL 7035, light grey. Protection degree is IP20. Included accessories: 1 x brush, 1 x set of captive nuts (PU 20 pcs.), earthing bar and earthing cables, 4 x levelling feet M12, and 2 x keys. Delivery is in transport packaging on a disposable pallet.