Custom order, non-cancellable. Product information: The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The molded boot impresses with its slim design, making it easier to plug in in tight spaces. Additionally, one side of the patch cable features a 90° angle, further simplifying the patching process. Cross-section 4 x 2 x AWG27/7. Length marking on the boot. Product features: Jacket color gray. Application area: Structured building cabling, Industrial Ethernet, Data Center. Category 6A (TIA). Connector type for connection 1: RJ45 8(8). Connector type for connection 2: RJ45 8(8). Connector type: Standard RJ45 blue. Contacts: Gold-plated. Pin assignment: 1:1 assignment according to TIA/EIA 568B. Design: Shielded. Length marking: Yes. Strain relief boot molded. Color of strain relief boot: gray. Latch lever protection: Yes. Plug cycles: 750. Bending radius: >30 mm. Shielding contact: Point contact shielding. Suitable for protection class (IP): IP20. Raw cable: Cat.6A. Cable type: S/FTP. Cable construction: 4x2 AWG cross-section 27/7. Conductor material: Copper. Jacket material: LSZH. Outer diameter of the cable: 6.0 mm. Flame retardant: Yes. Halogen-free: Yes. Low smoke: Yes. Oil resistant: No. Chemically resistant: No. UV resistant: No. Ozone resistant: No. Temperature range: -20 to 60 °C. NVP value: 74%. Impedance: 100 ±15 Ω. DC conductor resistance: 185 Ω/km. Loop resistance: 370 Ω/km. Contact resistance: 30 mΩ. POE class: PoE according to IEEE802.3af, PoE+ according to IEEE802.3at, 4P PoE according to IEEE802.3bt. Maximum current carrying capacity: 1 A. Operating/nominating voltage max.: 50 V DC. Bandwidth: 500 MHz. Transmission: 10 Gbit, 2.5 Gbit, 5 Gbit. Cabling standard: ISO/IEC 11801, ANSI/TIA-568-C.2, EN50173. Connector: IEC 60603-7-51.