The Projecta All-in-One Control Box offers multiple control options in a single device. This new accessory can be combined with motorized projection screens that do not have an integrated RF receiver and provides the following options:

• Dry contact (Relay)
• RF (Radio control)
• IR (Infrared control)
• Manual switch on the box
• 12 Volt trigger

Relay (Dry contact)
Use the dry contact terminals in the control box to connect the screen to a third-party control system. A control system integrates the projection screen into the complete AV control of the room.

RF (Radio control)
Control the projection screen via a radio remote control. The remote operates at a frequency of 433.92 MHz. RF has an effective range of up to 30 meters, depending on the local environment.

IR (Infrared)
Control the projection screen via an infrared remote control. A direct line of sight to the control box is required for infrared control. IR can be a solution for environments with limited RF access. Infrared has an effective range of up to 8 meters.

Manual switch
On the side of the control box, you will find three buttons to directly control the projection screen. This additional control method acts as a backup to ensure that the screen can still be operated even if the connected control options fail.

12 Volt DC Trigger
Connect the 12 Volt trigger option to any 12 Volt output to trigger the projection screen. The 12 Volts can come from a 12 Volt trigger output of a projector or from an AV control system.