GeneralPureresin Standard A is an alcohol washable standard resin. Pureresin Standard A is suitable for use with DLP or LCD/LED 3D printers. The use of high quality raw materials results in a high performance resin that can be processed with very short curing times.Properties- Very short curing times- High detail accuracy- Sharp contours- Smooth object surfacesPackagingPureresin Standard A is supplied in a light-protected HDPE bottle with 0.5kg or 1kg contents.StorageThe resin should be stored in a dark, cool and dry place. Avoid direct sunlight and temperatures above 30°C to ensure the longest possible shelf life.SafetyRead the safety data sheet carefully and follow the safety instructions. Use the resin only in a well-ventilated place. Wear nitrile gloves and safety glasses when working with resin.ProcessingBe sure to shake the before each processing to achieve a homogeneous mixing. During storage, the colour particles may settle at the bottom of the bottle.Exposure times:Base layers: 15-40sResidual layers: 1.5-15sPureresin Standard A can be cleaned after printing using alcohol(e.g. isopropanol). The uncured resin dissolves in the alcohol. Never leave the printed part in the alcohol bath for more than 15 minutes to avoid damage to the printed part. Colour The RAL colour number and designation are for reference only and are not intended to be an exact specification. The actual colours are always in a similar colour range to the RAL colour mentioned. A complete match to the named RAL colour is not guaranteed.