CM stands for Cable Management at be quiet!, i.e. a partial modular power supply unit with fixed standard cables that you need anyway and separate cables that you can connect additionally depending on the components.

Not at all. There will be a successor model. My alternative: be quiet! Pure Power 11 FM (750 W)

Hello I have a very small case with mini ITX formfacktor and the power supply fits perfectly.

Yes, this is possible. There are sufficient connection cables available. The only question is which graphics card will be used? Because it depends on whether the performance is sufficient

How you couldn't find anything online... Specifications --> External links --> Manufacturer's page (en) --> https://www.bequiet.com/de/powersupply/1535 there Downloads Datasheet / Manual / Wiring harness can also be found with a search engine

According to the manual, the pins are arranged in the same way as for the motherboard, i.e. 8 7 6 5 4 3 2 1 so that shouldn't be the problem. However, I am surprised that the PC boots without the CPU power supply. Which motherboard + CPU are we talking about?

On the manufacturer's homepage you will find a calculator which also gives a recommendation for a suitable power supply unit: https://www.bequiet.com/de/psucalculator. There are other calculators on the internet where you can also enter the other components (e.g. www.netzteilrechner.com). Presumably 500W is a bit tight.

here is a power supply calculator : https://www.bequiet.com/de/psucalculator I hope it helps

I have a 1070 and Ryzen 3600 in use with exactly this 500w power supply. Everything is tiptop. Otherwise, have a look at: https://www.bequiet.com/en/psucalculator where you can calculate the consumption.

Yes, see scope of delivery

The power cable on a PC power supply unit is plugged in. If you have another one from another device that fits, you can use that too. However, you can still complain to Digitec Support and have a correct cable sent to you. see below - - - - - - - - - - - - - - - - - - - - Digitec is obliged to supply electrical appliances with a Swiss plug. If the appliance has a foreign plug, a suitable replacement cable should be supplied if the mains cable is pluggable or, alternatively, a suitable adapter if the mains cable is permanently connected. If the appliance is delivered without a suitable plug, complain to the customer service and insist on a cable or an adapter, free of charge. Point 1 --> https://www.esti.admin.ch/de/themen/faq/elektrische-erzeugnisse-marktueberwachung/

The one for 91.- has a partially modular cable management, the one for 83.- does not.

That should work if it's a good power supply and not much else in the system consumes power. However, you are certainly better off with the PurePower and the 600W.

Digitec is obliged to supply electrical appliances with a Swiss plug. If the appliance is supplied with a foreign plug, a suitable replacement cable should be supplied if the mains cable is pluggable or, alternatively, a suitable adapter if the mains cable is permanently connected. If the appliance is delivered without a suitable plug, complain to the customer service and insist on a cable or an adapter, free of charge.

Should be enough ryzen 5 needs 65 W and the 3070 from zotac needs 220 W but don't know how the wattage differs with the other suppliers

Yes, I use the power supply with a Ryzen 3600 and a GTX 1660 and it fits well.

order nothing, buy nothing yourself ------8<------------------8<------------------8<------------------8<-------- Digitec is obliged to supply electrical appliances with a Swiss plug. If the appliance comes with a foreign plug, a suitable replacement cable should be supplied if the mains cable is pluggable or alternatively if the mains cable is permanently connected, a suitable adapter should be supplied. If the appliance is delivered without a suitable plug, complain to the customer service and insist on a cable or an adapter, free of charge.

Yes. Here is an overview of the connections of the NT: https://www.bequiet.com/admin/ImageServer.php?ID=9dc14a18462@be-quiet.net&.jpg

Yes fits, even though there are over 30 different Asus Rog Strix-E gaming motherboards.

...it is the same: model number BN299

...yes, there is a defective component in it, if it is still under warranty, send it in and claim under warranty!

No, a basic cable set is supplied. It's nothing special, but it serves its purpose. This can also be seen on the manufacturer's website: www.bequiet.com/de/powersupply/1535

All good quality cables are included in the package. So you don't need to buy anything else for the electrical connections. It is my 2nd bequiet power supply unit.

hello yes is supplied with Swiss plug

Hello Cwdosman. One piece has angled SATA with it. It is difficult to see in the picture. Otherwise, you can also buy separately here: StarTech 4X SATA Splitter (40cm) Greetings Bandy

CM stands for "Cable Management" and means that some cable harnesses are plugged in and can be removed if necessary. This means that SATA power connections or GPU plugs can be left out for a cleaner look.

For products with a German connection, a corresponding adapter is supplied.