Yes, that is possible. You can find it under the accessories here. :)

The feet are also included in the version. :)

It is included. As is the 3-leg

Hello Nicfab0303 I'm assuming this isn't possible, but you might be able to check with a review on YouTube. good luck. :)

DJI has put a "Ronin-SC Camera Compatibility List" online at "https://dl.djicdn.com/downloads/Ronin_SC/20200610/Ronin_SC_Camera_Compatibility_List_en.pdf". I myself own a Panasonic DC-G9. Although it is explicitly included in this list, the gimbal worked with the cables supplied, but only rudimentarily. I was only able to access the full range of functions (via the app) after I bought an extra cable for quite a bit of money.

Hi Yann1234, this should be no problem with an 80D as long as you don't put a monster lens on the front. Greetings

1x Ronin-SC gimbal 1x BG18 handle with built-in battery 1x extension / tripod 1x quick release plate 1x camera holder 1x smartphone holder 1x Lens support 2x 8-pin connector cover 2x spanner 3x Camera screw 1/4"-20 4x M4 screw 1x Multi-camera control cable (Multi-USB) 1x Multi-camera control cable (type C) 1x USB cable type C 1x Multi-camera control adapter (Type C to Micro-USB) 1x Carrying case

Hello, I don't know if there's any accounting, but I have this product for sale, which I've never used.

Payload of 2.0 kg. If you add up the weight of the individual parts, you have the answer more or less.

Since the part is not available for an indefinite period of time anyway, you don't need to worry about it.

I'm pretty sure this would also work with an a7IV, especially since it's under the maximum weight. Depends on the lens then, of course.

No fits, together you come to approx. 1500g, camera and 2.8 lens. The Ronin is designed for 2kg

Infinite barrel roll works

There is no Sigma 35-70mm for E-mount. Which one is meant? If in doubt, I would take the larger model.

In terms of weight, it should fit, but the shape is rather problematic. The gimbal comes with a USB-C to C and a USB-C to USB-B micro. My tip: borrow the Gibal from a photo shop like Zumstein beforehand. That way you can test it and then still buy it here without frustration ;-)

Switch on the Ronin SC, then try to connect the Bluetooth... for me it comes immediately. And otherwise it might be a case for the warranty.

Apart from the fact that I don't have a Sony, but if it is listed in the compatibility list, it should also work. Provided it has the right cable, it should be included. You can't zoom with it because it needs an internal zoom lens. As soon as you zoom, the weight shifts to the front or back and the balance is lost. What I don't like about this Dji Ronin-SC is the balancing of the horizontal and vertical axis, because there is only one locking screw. However, once it is well balanced, it does what it is supposed to do.

Look on the manufacturer's page under compatible devices. New ones are constantly being added and activated via firmware updates.

This camera seems too big for me. This gimbal is for still cameras

The Ronin is designed for a weight of up to 2 kg. The total load of the Nikon with the lens is therefore rather borderline. I can balance my Fujifilm XT4 with 18-135 mm zoom lens (weight 1.2 kg) just at the rear stop of the mounting plate. In my opinion, however, it makes little sense to use a gimbal with a fixed telephoto lens. Lenses in the wide-angle or 80 mm range make more sense. These lenses are correspondingly shorter and lighter. If the combination with the 135 mm lens is still to be used, then I would leave out the 'elevation plate' included by Ronin when mounting the camera (if this is not already the case anyway) and buy another mounting plate with counterweights. Just google: Ronin quick release plate with counterweights. I don't have any experience with this, but from what I've read it should solve the problem.

Hallo Gemäss Herstellerseite wird diese Kamera nicht unterstützt. https://www.dji.com/ch/mobile/support/compatibility?product=ronin-sc

Hello, Yes, the tripod and the smartphone holder are included

The battery is integrated in the handle and is charged via USB. If the capacity is not enough, you can buy an extra battery/grip: Dji Ronin-SC BG18 Grip (mount)

Hello, Yes, it is included in the box.