EUR328,91
G.Skill Ripjaws V
Questions about G.Skill Ripjaws V
What would you like to know?
0 questions and answers
Helpful answer
Hello, I would need to know your motherboard and processor before proceeding. Thank you
Helpful answer
Of course, this also depends very much on what your CPU and the internal memory controller can handle. According to the spec, your CPU is maxed out at 2666, everything above that is just luck or try & error, increase voltages, adjust timings, different board. I have had them running at 1.5v on 4000 CL12. But it was also a lot of fiddling with the values
Helpful answer
They are dual rank.
Helpful answer
Hello, yes, it works fine because it's a DDR4 DIMM. It's compatible with the motherboard and supports 4400 MHz.
Should be Dual Rank. Here is a screenshot from HWiNFO64. (Have installed the RAMs.) https://i.imgur.com/A6uFCy4.png
Hello, yes, they are compatible with the board. I have the same board. Greetings
Hello. yes. Your board supports xmp profile I. There are I and II. I also have Gskill, best quality. Have fun with it and don't forget to change the memory profile in the bios to XMP. Greetings Dii
Sure, as long as you have room on your mainboard for 4 bars, that's no problem.
Helpful answer
Hello, yes, these bars are compatible with the components. I have them in too. Greetings
Must be a mistake... Probably the price of 1x16GB? If you order them like this, don't be surprised if you get an invoice again.
https://www.gskill.com/specification/165/184/1562835281/F4-3600C18Q-64GVK-Specification
Indeed, the difference is mainly in the design. There will be no difference in performance on an AMD or Intel processor.
Helpful answer
CAS latency: 168.- = C18 180.- = C16 smaller/shorter = better https://www.digitec.ch/Comparison/12944272-12944259
Supplier cannot deliver at the moment. As soon as this is the case again, the status will be updated here automatically.
Hello, unfortunately they are not listed on the compatibility list. https://www.asus.com/Motherboards/ROG-STRIX-Z390-F-GAMING/HelpDesk_QVL/
Helpful answer
Please contact our customer service directly so that we can check your request. You can find more information and our contact details here: https://helpcenter.galaxus.ch/hc/de
It supports DDR4 modules with up to 3200 MHz, so everything is fine.
This one? -> ASUS ROG CROSSHAIR VI HERO (AM4, AMD X370, ATX) It is not listed as compatible in the QVL list on the motherboard nor on the manufacturer's side of G.Skill.
Should work (I'm really bad in French :)
About 2 working days in my experience
Helpful answer
Probably. Maybe even more.
Helpful answer
I think so, but 2400mhz is quite low for Ryzen.
That should work in principle.
Yes, no problem.
Is it possible that you have Ripjaws IV and not Ripjaws V? A photo of your bars would be helpful. There are also many different colours.
Helpful answer
hello, g skill recommends their ram bars made specifically for amd. https://www.gskill.com/en/press/view/g-skill-announces-flare-x-series-and-fortis-series-ddr4-memory-for-amd-ryzen on the website you can also see the speeds and kit configurations that have been validated by g skill. hope could help.
Helpful answer
Unfortunately, we have neither tested this nor can we confirm it. Ryzen had problems with high clock speeds, but this should have been fixed with the BIOS updates.
30 of 36 questions