EUR164,52
HyperX Cloud Flight
Wireless
Questions about HyperX Cloud Flight
What would you like to know?
0 questions and answers
Not on the headset directly.
HyperX does not offer this as a spare part, sorry.
Helpful answer
Hello Jäggi Exactly. Connect the USB dongle, wait until the headset is recognised and set up, switch on the headset and off you go. If necessary, the headset must still be selected in the Windows playback settings. This worked for me without any problems.
Hi Bruno This is primarily an active headset, i.e. to be used via the USB wireless adapter on PC and PS4. So I wouldn't buy it to use it primarily wired via 3.5mm. Basically, I find it a solid headset. The sound is good for a gaming headset and the mic is one of the better ones, but I replaced it with an Antlion ModMic.
Helpful answer
No, this is not possible because the headset is connected to a USB dongle. This can only be plugged into one place.
yes. with the software
Unfortunately, no one can give you a general answer because the devices transmit in the 2.4Ghz band and it depends on how many other signals interfere and on the condition of your flat. Wireless mice and keyboards, as well as WiFi, also operate in the 2.4Ghz band. I, for example, have several such devices and a specially powerful Wifi access point in the same room and can be up to 8m away from the transceiver with only rare problems.
However, the headphones must be operated by cable as far as I know. Unless I've read something over. The noise cancelling will work when the battery in the headset is charged because the noise cancelling runs on it.
For heaven's sake, please use commas or full stops (punctuation)! Please check the following: - Operating system? - USB 2.0 port used & active? - Device charged? - Driver installed? - Microphone plugged in correctly? - within a reasonable range (<10m), with no walls in between?
Helpful answer
I never had any problems with noise, never a single complaint on Discord ;)
Helpful answer
So yesterday it was no longer on offer today and today is black friday?
Helpful answer
Stereo only
With a stick. But if the battery is empty, it can also be operated with a cable. Greetings
Helpful answer
Yes, I have the headset and also use it part of the time while charging (audio / microphone). However, the cable supplied is rather short for this purpose.
https://www.hyperxgaming.com/us/headsets/cloud-flight-wireless-gaming-headset I have just been able to answer my own question. (via cable microphone NOT usable) Sorry Digitec. Thanks anyway <3
It is quite possible that this is a defect. If the suspicion is to be confirmed, the unit would have to be sent in.
I can only find them on Amazon, the others are for the alpha version of the headset.
Unfortunately, we do not have any replacement pads in our range.
The headset should actually come with a 3.5 mm jack headphone cable. If this was not the case, please contact our customer service directly via the help centre.
Are you sure it has to do with the headset ? And not a power cable that is not plugged in properly. However, there are strange effects when devices are "sensitive" to interference in the 2.4 GHz range. I would update the software of the TV. You may simply have to remove the headset from the list of Bluetooth devices in the TV.
30 of 40 questions