JBL Wireless Mikrofon Set
Questions about JBL Wireless Mikrofon Set
What would you like to know?
0 questions and answers
As far as I know, the microphones only work via one speaker, even if both speakers are connected via Bluetooth, namely via the speaker to which the receiver is connected.
This would also work with a laptop: Lindy 3.5mm - 6.3mm (jack adapter)
A ø30mm microphone clamp should do the trick: DAP-Audio 30mm clamp
Helpful answer
No, a preamplifier and a power amplifier matching the speaker are required between the microphone receiver and the speaker. However, this microphone can be used with an active speaker (speaker with built-in preamplifier and power amplifier) with a 1/4 inch jack input.
All you need is a large input jack. The radio transmitters are with the microphones. They are not Bluetooth. However, they work very well.
The set works with all devices that have a jack input. Your Sony speakers should also have this.
Helpful answer
CH1, CH2 etc. are the channels on which the microphone transmits. It could be that someone else in the vicinity is using exactly the same microphone. You can then agree on which channel to transmit on.
Helpful answer
I use it on a Sony XP700: it works perfectly.
According to our information, it would not. (It's for the PartyBox)
I use it on a Sony speaker, anywhere you can put a mono (TS) microphone signal.
Out of the box: no. The connectors are not the same. To try it, you'd need a TS jack to TRRS mini-jack adapter to be recognized as a microphone on the MacBook. Or to get the jack signal into a USB on the MacBook. In itself, not impossible, but it's a bit of a trick.
Helpful answer
So I read: "Delivered tomorrow More than 10 pieces in our warehouse"
Delivered between Fri 22.9 and Thu 19.10. 6 pieces ordered from the supplier. Probably not.
Hi, if the party box has the appropriate connection, nothing should stand in the way. Many greetings, your team from Galaxus
Helpful answer
Hi, I couldn’t connect it to any device I had at home, so I have returned it. Maybe you can get it work with LG Rg.
Since the "Phones" socket is an output (stereo), this unfortunately does not work. An input is required for the connection.
Yes, the receiver can be connected to the "Party Box 310".
According to the manufacturer, it cannot be guaranteed that the microphones will also work with the mixing console. Theoretically, however, the dongle should fit.
25 of 25 questions