The main difference between the NZXT H5 Flow RGB and the NZXT H5 Flow lies in several key areas: ## Fans and airflow - The NZXT H5 Flow comes with two 120mm fans that have a 3-pin connector and a fixed speed of about 1200 RPM. These fans are quiet and produce about 25.1 decibels of noise. - The NZXT H5 Flow RGB, on the other hand, comes with four fans, including two additional 140mm RGB fans, which also have a 3-pin connector and a speed of 1200 RPM. These fans are slightly louder at around 30 decibels of noise. ## RGB lighting - The H5 Flow RGB includes RGB fans that provide lighting, while the H5 Flow does not have RGB lighting. The RGB fans of the H5 Flow RGB require a connection to a 5-volt RGB header on the motherboard to control the lighting. ## Price and value - The H5 Flow RGB is more expensive than the H5 Flow, but offers more fans and RGB lighting. The H5 Flow is less expensive and offers good airflow performance without the added features of the RGB model. ## General specifications - Both models have the same dimensions, the same motherboard compatibility (ATX, EATX, Micro ATX, Mini ITX) and the same connectors on the front panel (USB 3.2 Gen 1 Type A, USB 3.2 Gen 2 Type C).

Hello, Thank you very much, we'll get back to you as soon as possible!

The housing supports the installation of a 360 mm water cooler at the front. A 360 mm radiator can therefore be mounted at the front, while there is space for a maximum of a 240 mm radiator at the top. The radiators should have a standard thickness of 30 mm, combined with fans with a thickness of 26 mm, as compatibility problems can occur with thicker combinations.

The fans integrated in the 'H5 Flow' case are not specified in the data provided. However, NZXT H5 Flow cases generally include two 120 mm fans, one front and one rear, as described for similar models. To confirm the exact specifications of the 'H5 Flow' model, I recommend consulting the manufacturer's official website or the product manual.

The H5 Flow RGB (2024) PC case comes with a total of two pre-installed fans. Fan Placement: - Front: One F360 RGB Core fan is mounted at the front, which enhances both airflow and lighting. - Rear: There is also one F120Q fan located at the rear of the case, providing additional exhaust for effective cooling. Additionally, the case supports further fan installations, allowing for up to three 120mm or two 140mm fans at the front, two 120mm or 140mm fans at the top, and two 120mm fans at the bottom, although these additional fans are not included with the case.

The case comes with two pre-installed fans: one F360 RGB Core fan at the front and one F120Q fan at the rear.

The dimensions of the PC case are 465 mm high, 225 mm wide and 430 mm deep.

To control the RGB if the fans are connected to the motherboard, you can use your motherboard's RGB software. If the fans are connected via a 5V ARGB connector, they will be controlled as generic ARGB devices. If you're using a 4-pin NZXT RGB connector, you'll need to use NZXT CAM to control the lighting in the Lighting section.

To control the RGBs on the case, there is no dedicated controller included. However, the RGB fans can be connected to a 5V ARGB connector on the motherboard or to an NZXT RGB connector, and they can be controlled via the NZXT CAM software if connected to the NZXT connector.

The "H5 Flow RGB (2024)" PC case comes with two fans: an F360 RGB Core fan on the front and an F120Q fan on the rear. These fans are included to provide powerful cooling and lighting right out of the box.

The H5 Flow RGB case does not provide a fan at the bottom of the PC. However, it does support the installation of two 120mm fans at the base. The fans supplied include an F360 RGB Core on the front and an F120Q on the rear.

The H5 Flow RGB comes with two fans: a front-mounted F360 RGB Core (CV) and a rear-mounted F120Q (CV). These fans are pre-installed to provide powerful cooling and lighting out of the box.

I don't have any precise information about the presence of a hub with the H5 Flow RGB PC case. The information available does not specifically mention a hub in the contents of the case. You may need to consult the manual or contact NZXT directly for more details.

The PC case does not appear to include any specific additional connectors supplied with the case itself. However, it does have USB ports and a headphone socket on the front panel, suggesting that the main connectors are built into the case. For more details on the accessories included, it's best to consult the manufacturer's manual or official documentation.

The NZXT H5 Flow case has two integrated fans: an F360 RGB Core fan at the front and a 120 mm F120Q fan at the rear without RGB.

The 'Flux H5' case is compatible with standard ATX power supplies, with a maximum length of 185 mm. There are no specific restrictions on power supply models, so any ATX power supply that falls within these dimensions should be compatible.

The H5 Flow does not appear to be a specific product mentioned in the search results, but NZXT's H5 Flow and H5 Flow RGB models are described as PC cases compatible with ATX, Micro-ATX, Mini-ITX and E-ATX motherboards. These cases support ATX power supplies, with a maximum length of 200 mm. If the product 'H5 Flow' refers to one of the H5 Flow or H5 Flow RGB models, then yes, it supports ATX power supplies. However, the manufacturer code "CC-H51FW-01" does not match the codes mentioned for the H5 Flow or H5 Flow RGB models, which are "CC-H52FW-01" and "CC-H52FB-01" respectively. This could be a different model or an error in the manufacturer's code.

You can actually control them using software. E.g. Armory Create. Or depending on the mainboard

The H5 Flow RGB case includes four fans: two pre-installed F140 RGB Core fans and two F120Q Quiet Airflow fans. These fans help maintain optimal airflow and cooling within the case.

This PC case can handle a total of five fans: two 140mm fans on the front, two 120mm fans on the top, and one 120mm fan at the rear and another at the bottom. Additionally, it supports radiators up to 280mm on the front and 240mm on the top.

The fans in this case are placed as follows: one F360 RGB Core fan is mounted at the front, and a single F120Q fan is mounted at the rear. Additionally, there are mounting points for fans on the top and bottom panels, allowing for further customization.

The H5 Flow RGB uses F360 RGB Core fans for the front panel and an F120Q fan for the rear panel. The F360 RGB Core fans have a rotation speed of 1,700 ± 200 RPM, while the F120Q fans rotate at 1,350 ± 150 RPM. These fans are designed to offer a good balance between cooling and low noise, with noise levels of 23.3 dBA and 24.1 dBA respectively.

Depends on which connection you have

The case measures 464 mm in height, 227 mm in width and 446 mm in depth, weighing approximately 7 kg. These dimensions make it a compact but not too bulky mid-tower case.

Two fans are included in the scope of delivery, the rear one and the lower one for the graphics card. You have to buy the two for the front yourself! It is in the description how big they can be.

The NZXT H5 Flow RGB case includes an F360 RGB Core fan at the front and an F120Q fan at the rear. If you wish to add more fans, you can install up to two 120 mm fans at the bottom, which are not included in the standard package. For more options, you can consider case-compatible fans, such as 120 mm or 140 mm fans, depending on your cooling needs.

The NZXT H5 Flow RGB case includes two pre-installed fans: an F360 RGB Core fan at the front and an F120Q fan at the rear. However, if you wish to add more fans, you can install up to two 120 mm fans at the bottom, which are not included in the standard package. For additional fans, you can choose any model compatible with the size and connection type supported by the case.

Yes, you can also use the fans of the H5 Flow RGB without an RGB controller. The supplied fans, such as the F360 RGB Core (CV) and the F120Q (CV), each have a single power connection and can be connected directly to the motherboard or to a separate fan controller without the need for an RGB controller.

The NZXT H5 Flow RGB (ATX) case comes with a total of four fans pre-installed: - Two RGB fans at the front, which can be controlled via the motherboard's ARGB header. - One non-RGB fan at the rear. - One angled 120mm fan at the bottom, which is specifically designed to cool the graphics card. The case is compatible with the Gigabyte B550 AORUS Elite V2 motherboard, as it supports ATX, Micro-ATX and Mini-ITX motherboards.

Thank you very much, the department responsible has been notified and will remove the illustration as soon as possible!