Yes, the PSA1 also comes with a 3/8" to 5/8" thread adapter, with which it can be connected to the HyperX QuadCast :-).

The boom arm has a normal microphone stand screw. As far as I have seen, the holder of the NT-USB has a normal microphone stand thread - so it should be possible to attach the microphone and the holder to the boom arm.

I assume yes. the scope of delivery for the Wave3 states: SUPPLY The Wave:3, USB-C cable, desktop stand, microphone arm adapter, quick start guide. I had already clarified this for myself.

The table fastening can be drilled in as well as stapled on

yes you can.

Hello Tattoofreak, This is possible, but note that you need an adapter: IMG STAGE LINE thread adapter 3/8" to 5/8"

Yes, you can use the RODE PSA1+ with the RODE Podcaster. The PSA1+ is compatible with microphones that weigh between 94g and 1.2kg, and the RODE Podcaster falls within this weight range. The PSA1+ also offers a flexible mounting system that supports both end and side address microphones.

Think no original but if you enter rode microphone arm base on Google there are definitely some

The screw clamp of the PSA1+ studio arm can hold table tops up to a thickness of 70 mm. If your tabletop is very thick, the supplied screw clamp may be sufficient. Alternatively, there is also a Threaded Desk Insert for tabletops up to 55 mm thick. If your tabletop is thicker, you could look for a special solution or adapt the desk mount for screens if possible.

To secure the top arm of the RØDE PSA1 microphone stand and prevent it from moving upwards automatically, follow the steps below: 1. adjusting the spring tension: Ensure that the spring tension of the arm is adjusted to suit the weight of your microphone. This can be achieved by adjusting the spring tension to hold the arm in the desired position. 2. secure attachment: Check that the arm is properly secured to your desk. Use either the Desk-Clamp or the Desk-Insert to secure the arm firmly and securely. 3. cable management: Ensure that the cables are properly managed to avoid any unwanted movement of the arm. The Velcro cable wraps supplied can help with this. If the arm continues to move unintentionally despite these measures, it may be helpful to consult the instructions again or contact the manufacturer's customer service.

As long as you have a threaded connection: 3/8" or 5/8" for the mount, you can use any microphone. An adapter from "3/8 to 5/8 adaptor" is included in the scope of delivery.

The PSA1 is supplied without shock mount. The arm ends in a 9mm (3/8") threaded rod. An adapter for 16 mm (5/8") is supplied. According to the manufacturer's website, your microphone is sold in a set that includes a suspension that attaches to a 16 mm rod with a 9mm adapter. So yes, it works and you should even end up with a spare threaded rod adapter.

Stands only!

No, this product consists solely of the arm!

PSA1 is without sleeves PSA1+ is with sleeves Both times there is no micro included!

Just buy the PSA1 without + Then there is no foam in the first place

Unfavourable photo, it is black as it says in the description. It's not available in white. A little tip: Google! Keepdrum has a very nice white stand/arm.

That a RODE microphone base will be compatible with a RODE microphone is, I think, self-evident.

Dazu fragst am besten direkt im Kundendienst an: https://helpcenter.digitec.ch/hc/de/requests/new?ticket_form_id=39231 LG

I have measured this on my PSA1 and, as Nathan83 has already pointed out, the base has a diameter of 7 cm and the mounting bracket requires a maximum of 1 cm between the table and any wall or similar -> attached is a link to the picture of the base (is from PSA1 +, but looks the same) https://www.digitec.ch/im/productimages/1/8/3/2/5/4/8/5/5/2/5/1/0/2/1/7/5/2/5/162a7e0e-71f2-436b-a8a2-1b1da1c6fd91.jpg?impolicy=ProductTileImage&resizeWidth=321&resizeHeight=700&cropWidth=321&cropHeight=700&quality=high

Jop :) passt bestens.

With a table clip. Works great!

I also had a look and found nothing.

Yes it works fine. I use the same combo

It does yes

Normally, yes it is compatible :)