Hi, I use it on a gigabite rtx 5070 ti and it works fine, for the power supply as far as I know it is compatible for all seasonic full modular

Yes, the cable is suitable for the RTX 4070 Ti, provided your power supply belongs to the compatible series (650 W or higher, e.g. PRIME, FOCUS GX/PX). It delivers up to 600 W via the 12VHPWR connection and is designed for graphics cards with 12VHPWR or 12V-2x6 connectors. Important requirements: - Power supply series: PRIME, FOCUS GX/PX, Platinum/X-Series (650 W+). - Not compatible with FOCUS Gold/GM or power supply units under 650 W. - Installation: Both 8-pin connectors of the cable must be connected to the power supply unit and the connection to the GPU must be fully plugged in and locked. If you are unsure about your power supply model, take a look at the manufacturer's specifications or the model number.

No

No

No, you cannot use the Seasonic 12VHPWR adapter cable in the reverse configuration you described. Here’s why: - The 12VHPWR connector is designed to be connected to the power supply unit (PSU) that supports the new ATX 3.0 or PCIe 5.0 specifications, and the 8-pin connectors are meant to be connected to the graphics card (GPU). - Using the cable in reverse would not only be incompatible with the intended design but also potentially unsafe, as it could lead to improper power delivery and damage to the components. The correct configuration is to connect the 12VHPWR end to the PSU and the dual 8-pin ends to the GPU. This ensures proper power delivery and safety according to the manufacturer's specifications.

16 AWG

"Hello", at Digitec they only have it in black, but CableMod makes some very nice ones in white compatible with Seasonic power supplies. https://eustore.cablemod.com/

Not with this cable. This is only for a Seasonic power supply.

None of our suppliers currently list this cable in their catalogue. Perhaps we will have it in the future, but so far there is no concrete information.

No, this cable (applies to all these modular power supply cables) may only be used with the power supply units listed in the description! Each manufacturer uses different connections (pinouts). In some cases there are even differences within the same manufacturer. Even if the plug fits, short circuits can occur if the pinout is different.

Your AMD 7900xtx most likely has 2 8-pin 2.0 PCI-E power connectors. As this cable was designed for the new Nvidia cards, you do not need this. You can use the normal cables that came with your power supply. And for your information, VERY IMPORTANT, never mix cables from different PSU suppliers as they have different connectors on the PSU. If you do this anyway, your card may burst into flames.

Salü, almost certainly not. The connectors on the Seasonic power supply do not look like normal 8-pin PCI-E connectors. You have the "normal" cables for that. LG

600 W max. power load

According to the manufacturer, the cable should go from 2x 8-pin (PSU) to 1x 12VHPWR (GPU). The cable should be intended to use a 12+4 pin GPU with an ATX 2.xx power supply from 850 watts.