The Arctic Liquid Freezer III 420 A-RGB fits in a PC case that can accommodate a radiator size of approximately 420 mm in length. The radiator dimensions are about 458 mm (length) x 138 mm (width) x 38 mm (height). The Thermaltake View 380 XL TG ARGB case supports graphics cards up to 420 mm in length and CPU coolers up to 160 mm in height, but the key factor for fitting the Liquid Freezer III 420 A-RGB is the radiator mounting space. This case is a Midi Tower and typically supports radiators up to 360 mm or 420 mm depending on the mounting options. Given the radiator length of 458 mm, it is likely that the Liquid Freezer III 420 A-RGB radiator may be too long to fit comfortably in the View 380 XL TG ARGB case, which is designed for standard radiator sizes up to 420 mm. The case specifications do not explicitly confirm support for a 420 mm radiator of this length. Therefore, the Arctic Liquid Freezer III 420 A-RGB may not fit properly in the Thermaltake View 380 XL TG ARGB case due to the radiator length exceeding typical 420 mm radiator mounting space in this case. It is recommended to verify the exact radiator mounting dimensions of the case before installation.

The Arctic Liquid Freezer III 420 A-RGB has a radiator size of 458 mm (length) x 138 mm (width) x 38 mm (height). The Thermaltake View 380 XL TG ARGB case supports graphics cards up to 420 mm in length and CPU coolers up to 160 mm in height, but the case type is a Midi Tower without specified radiator support dimensions in the provided data. Given the radiator length of 458 mm exceeds typical 420 mm radiator slots and the case's maximum GPU length is 420 mm, it is unlikely that the 420 mm radiator of the Arctic Liquid Freezer III 420 A-RGB will fit inside this case without specific radiator mounting support for 420 mm radiators. Therefore, fitting this cooler in the case is probably not feasible based on the radiator size and case specifications.

The front panel of this enclosure is connected via the front connectors that support USB 3.2. The exact connections for power, reset, audio and USB are located in the front I/O area of the case and are connected to the corresponding headers on the mainboard. There are separate 3-pin ARGB connectors for the ARGB lighting of the fans, which must also be connected to the mainboard. Detailed instructions for connecting the front panel can be found in the user manual or in the how-to videos from Thermaltake for the View 380 XL TG ARGB.

Four 120mm ARGB Lite fans are installed in the case: Three reverse fans on the right-hand side as fresh air intake and one standard fan at the rear as exhaust air. All fans have a speed of 1000 rpm and are equipped with 9 LEDs in the hub, which can be controlled via a 3-pin ARGB connection.

Yes, the pre-installed fans are already connected to the integrated fan hub at the factory.

According to our information, the cables from the front panel are not combined into a single cable harness.

Yes, according to the information available, a fan hub is included in the scope of delivery.

Yes, this PC case has built-in fans. It has four pre-installed 120mm ARGB Lite fans, three of which are side-mounted for fresh air intake and one at the rear for hot air exhaust.

No, this is not included.