TeSys GC
Series: GC25
Number of poles: 4
Coil voltage: 240 Vac
Rated contact current: 25 A
Rated contact voltage: 415 Vac
Contact configuration: 4 normally open contacts
Number of auxiliary contacts: 1
Connection type: Wire connection
Width: 35 mm
Maximum operating temperature: +50 °C

Modular contactors from Schneider Electric TeSys GC. These modular contactors can switch single-phase, three-phase, and four-phase loads. The TeSys GC series contactors are safe, easy to use, and simple to install. With their compact dimensions, they are suitable for a wide range of applications.

Features and benefits:

• Integrated auxiliary contacts for additional switching capacity
• Screw connections: Terminals with finger protection according to IP20, with both North American and international terminal markings
• Panel mountable with screws or DIN rail mounting
• Impulse relay function
• Day/Night function
• Insulation class 2: continuous safety for operators and third parties

Usage categories AC1 and AC3 for TeSys contactors:
The contactor usage categories define the current generation and disconnection values based on the type of load to be controlled and the operating cycle conditions.

• AC-1: Applies to all AC devices with a power factor of at least 0.95. Application example: resistive load, heating, distribution.
• AC-3: Applies to squirrel cage motors that are braked during motor operation. Application examples: all squirrel cage motors, elevators, escalators, conveyor belts, bucket elevators, compressors, pumps, mixers, air conditioning units.

Contactors of the TeSys GC series with double pole separation:
Yes, the TeSys GC series uses a linear translational movement that results in double separation of the poles.