Safety position switch with holding force, holding force 1300 N, 5 actuator positions, spring force locked, auxiliary release at the front, magnet voltage DC 24 V, actuator monitoring 2Ö/1S, magnet monitoring 2Ö/1S. Delivery without actuator, please order separately. Mechanical safety switches SIRIUS 3SE5 for position monitoring of movable protective devices. They ensure that protective doors, covers, or safety flaps/grids remain closed as long as a hazardous condition exists. The drive heads can be rotated 4x90 degrees without screws. There are 5 actuator positions available, one of which is at the end. The switching elements ensure very high contact reliability and can only be operated with a separately coded actuator, providing increased protection against tampering. LEDs conveniently indicate the current status of the device. The devices are globally approved (IEC, UL). With the appropriate switch configuration, the highest safety requirements according to PL e or SIL 3 can be met. The devices are available with spring or magnetic locking, in plastic with a holding force of 1300 N or metal with a holding force of 2300 N. A wide range of 3D coded actuators can be ordered. Some variants are optionally available with LED status indication. The 3SF1 series with direct connection to the AS-Interface bus system completes the portfolio. The actuator is not included in the delivery of the safety switches and must be ordered separately. Depending on the version, connectors and additional connection accessories are available as accessories. Safety is a SIRIUS business.