Best selling 3D printer accessories from Snapmaker
On this page you’ll find a ranking of the best 3D printer accessories from Snapmaker. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Snapmaker Laser Module - Artisan & Ray - 40W
The Snapmaker Laser Module is our latest high-performance diode laser addon, equipped with Air Assist. With this powerful module, users can upgrade their printers to much stronger desktop laser cutters.
General Features:
- Cut 20 mm pine wood in a single pass
- Cut 15 mm basswood plywood in a single pass
- Equipped with air assist (including air assist pump)
- Air Assist can be controlled via Luban
- Built-in quick change mechanism
- Focusing laser with focus lever
- Align the job using the crosshair
- Laser protection shield
- Orientation detection
- Overheating protection
- Smart Air Assist
Prevent charring, improve the quality of your work, and keep the laser lens clean. Air Assist can be controlled via Luban, so you no longer need to manually turn it on or off for different layers.
With over 1000 ready-to-use templates in Luban, you can create a design in just a few minutes. If you are both engraving and cutting in a project, it is not advisable to apply air assist to all layers. Therefore, you can activate air assist only for the cutting layers in Luban, saving you the hassle of manually turning it on or off for different layers.
A comprehensive library of up-to-date templates, including common patterns, shapes, and symbols, allows you to quickly create designs.
Calibrate the focus by entering the material thickness on the touchscreen and perform autofocus or focus the laser using the focus lever. The laser protection shield reduces laser radiation. Together with the use of the Enclosure for 2.0, Artisan, or Ray, laser hazards can be reduced from Class 4 to Class 1.
Compatibility:
- Snapmaker Artisan 3-in-1 3D printer
- Snapmaker Ray laser engraver and cutter.
2. Snapmaker Paired Hot Ends for J1
Snapmaker paired hot ends for J1
This is a set of 2 replacement hot ends for the Snapmaker J1. The set can be used with a variety of materials: they are designed for different materials including ABS, ASA, TPU, Breakaway PLA, PVA, and HIPS.
The hot ends are coated with silicone. This insulates the heated parts, stabilizes the temperature, and provides excellent protection.
3. Snapmaker 2.0 Material Basswood A350 5er Pack / Basswood Sheet
- Dimension: 300 × 300 × 1.5mm- Quantity: 5 Pieces- Applicable Carving Methods: Laser Engraving, CNC Carvingand CuttingBasswood is ideal for laser engraving and CNC cutting. Its soft, fine, and even texture makes it easy to work with, while its pale and inconspicuous colour doesn "t take away the details of the engraved patterns of the finished product (which also makes the wood itself easier to paint and colour).".
3D printer accessories
EUR47,90
Snapmaker 2.0 Material Basswood A350 5er Pack / Basswood Sheet
Accessories
4. Snapmaker 2.0 Material Acrylic A250 Pack of 5 Frosted Acrylic Sheet
Dimension: 190 × 190 × 3 mm
Quantity: 5 pieces
Applicable processing methods: Laser engraving, CNC machining, and cutting
The frosted acrylic sheet is an ideal plastic material for many CNC applications. It features a frosted surface that is scratch-resistant and fingerprint-resistant. Additionally, it is durable, shatterproof, and weather-resistant, making it suitable for all indoor and outdoor projects.
3D printer accessories
EUR29,90
Snapmaker 2.0 Material Acrylic A250 Pack of 5 Frosted Acrylic Sheet
Accessories
5. Snapmaker CNC Module 2.0
The CNC module from Snapmaker is a replacement module. This specific item has been designed for the Snapmaker 2.0 3-in-1 3D printer, making it ideal for anyone who wants a replacement or wishes to have an extra on hand to reduce project downtime. Included: 1 x CNC module. No additional accessories included.
6. Snapmaker Hot End for Dual Extrusion Module
Hot End for Dual Extrusion Module
This is a replacement hotend compatible with Dual Extrusion 3D Printing Module for Snapmaker 2.0 and Snapmaker Artisan. The hotend can be used with a variety of materials: ABS, ASA, TPU, Breakaway PLA, PVA and HIPS.
Easy to Change
The hotend can be changed within a few seconds and without tools. The Luban software automatically detects its size and sets the correct parameters automatically.
Note: The hotend for the Dual Extrusion Module is optimised to deliver consistently high performance across a wide range of materials.
3D printer accessories
−8%
EUR78,90 was EUR85,90
Snapmaker Hot End for Dual Extrusion Module
Hotend, Replacement parts
7. Snapmaker 200W CNC Module Bundle for 2.0 A/AT
Excellent processing quality. To enhance the rigidity of all linear modules and improve stability during laser and CNC machining, the 200W CNC module is equipped with reinforcement plates. Combined with a spindle that operates at 18,000 RPM, the module can effortlessly carve or cut various materials.
More flexibility in material selection. The powerful CNC module can easily and precisely process hard materials such as hardwoods (e.g., beech and walnut), jade, and other robust materials (e.g., brass, aluminum).
4-axis CNC machining. When paired with the Snapmaker Rotary Module (Harmonic Drive version), the Snapmaker is expanded to include a fourth axis. This makes it an extremely powerful desktop CNC machining platform.
ER11 collet. The standard ER11 collet not only ensures better runout but also allows for a more stable CNC milling speed and a larger step size. The collet also supports over 100 CNC bits with shank diameters ranging from 1-7 mm.
Attention! The included collet is only suitable for 3.175 mm CNC bits!
Included:
1 x 200W CNC module
5 x reinforcement plates
1 x boosted toolhead cable
5 x M4x22 screws
22 x M4x14 screws.
8. Snapmaker 2.0 Quick Swap Kit - 350
Quick Swap Kit
The Snapmaker 2.0 Quick Swap Kit is a new system that allows you to quickly switch between different functions. It is compatible with Snapmaker 2.0 A350T/A350/F350.
Features:
- One-minute swap
- Compatible with all tool heads that are compatible with Snapmaker 2.0
- Convenient function switching even within the enclosure
- All-metal construction to ensure reliability
The tool heads and platforms are made from high-strength materials that ensure the reliability of the Snapmaker design. Adding the quick swap feature does not compromise the precision of the three functions, as CNC grinding ensures the flatness of the quick swap surface.
Expandability is always a priority. The Quick Swap Kit is compatible with all tool heads that are compatible with Snapmaker 2.0, including the 3D printing module, the 1.6W laser module, the 50W CNC module, the 10W high-performance laser module, and the dual extrusion 3D printing module.
9. Snapmaker Hardened Hot End for Dual Extrusion Module 0.4 mm
This is a replacement hotend compatible with the dual extrusion 3D printing module for Snapmaker 2.0 and Snapmaker Artisan. The hotend can be used with a variety of materials: ABS, ASA, TPU, Breakaway PLA, PVA, and HIPS. It can be swapped out in seconds without any tools. The Luban software automatically recognizes its size and adjusts the correct parameters. Note: The heating unit for the dual extrusion module is optimized for consistently high performance with a range of materials. The hotend with a hardened nozzle is ideal for technical applications and is compatible with nylon, carbon fiber reinforced nylon, and glass fiber reinforced nylon.
3D printer accessories
−7%
EUR87,90 was EUR94,90
Snapmaker Hardened Hot End for Dual Extrusion Module 0.4 mm
Hotend
10. Snapmaker heating plate L for A350
Product order
See all products