Best Conceptronic products in the Controller cards category
On this page you'll find a ranking of the best Conceptronic products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Conceptronic EMRICK M.2 NVMe SSD PCIe Adapter
This M.2 NVMe SSD PCIe adapter connects directly to the motherboard and features ultra-fast PCIe 3.0 X4 lanes that transfer bandwidth of up to 32 GT/s. It also supports a wide range of M.2 Key M SSD drive sizes. This adapter enhances system performance and optimizes the efficiency of office and entertainment devices.
2. Conceptronic PCI Express Card
This 4-port SATA PCIe adapter uses a combination of Asmedia high-performance chips (ASM1061+ASM1093) to add 4 SATA ports. Each Serial ATA port supports transfer speeds up to 6Gb/s and is backward compatible with legacy SATA 1.5Gb/s or 3Gb/s drives. In addition, the card supports mode switching and can be effortlessly switched between IDE and AHCI systems.
3. Conceptronic SPC01G
This PCI Express card provides 2 serial ports and 1 parallel port for your PCI Express-enabled desktop computer. It is ideal for connecting your printer, ISDN adapter, or other devices that require a serial connection.
4. Conceptronic SRC01G
Conceptronic SRC01G - Serial Adapter
Device Type: Serial adapter
Form Factor: Plug-in card
Interface Type (Bus Type): PCI Express
PCI Specification Revision: PCIe 1.1
Ports: RS-232 x 2
Dimensions (Width x Depth x Height): 5.9 cm x 7.8 cm x 0.16 cm
Weight: 40 g
Data Link Protocol: RS-232
Processor: WCH382L
General Equipment Type: Serial Adapter
Network Ports: RS-232 x 2
Connectivity: Wired
Processor / Memory: Processor WCH382L
Expansion/Connectivity Interfaces: 2 x RS-232 - D-Sub (DB-9), 9-pin (on cable)
Marking: Plug and Play
Dimensions and Weight:
Width: 5.9 cm
Depth: 7.8 cm
Height: 0.16 cm
Weight: 40 g.
5. Conceptronic PCI Express Card 1xPort 2xUSB 3.2 Gen2 Type-C gr
Conceptronic 2-Port USB 3.2 Gen 2x2 Type-C PCIe Card
This PCIe card allows you to easily add an ultra-fast USB 3.2 Gen 2x2 Type-C port to your desktop computer. With a maximum data transfer rate of 20 Gb/s, it enables quick and efficient transfers of large files and documents. Transform your desktop with cutting-edge USB 3.2 Gen 2x2 technology for faster and more efficient data management.
Features:
- Supported Operating Systems:
- Windows 8 / 8.1 / 10 / 11
- macOS 10.8 to 10.10, and 10.12 or higher
- Linux Kernel 2.6.31 or higher
- Bandwidth: 20 Gb/s
- Connection: PCIe x4
- PCI Version: PCIe 3.0
- Chipset: ASM3242
- Standards: USB 3.2 Gen 2x2
- Color: Black
- Dimensions (W x D x H): 79 x 51 x 30 mm
- Weight: 32 g.
6. Conceptronic PCI Express Card 19 Pin Dual USB-A Ports bw
The Conceptronic adapter features 2 USB 3.0 ports equipped with a 19-pin connector. It establishes an internal connection to a 19-pin USB 3.0 socket and can be easily installed in a standard PC slot. This expansion adds two external USB 3.0 ports to your system, allowing for the connection of various USB devices.
7. Conceptronic 4-port USB 3.0 PCI Express card
This PCI Express card allows you to easily add 4 additional SuperSpeed USB 3.0 ports to your desktop computer. It has a maximum data speed of 5 Gb/s, is correspondingly fast and can copy large files and documents to and from your desktop computer. Simply insert the USB 3.0 PCI Express card into your computer's Express card slot, install the included drivers, and you're good to go!
8. Conceptronic PCI Express Card 2xPort USB 3.2 Gen2 Type-C bw
Conceptronic 2-Port USB 3.2 Gen 2 Type-C PCIe Card
This PCIe card allows you to easily add two high-speed USB 3.2 Gen 2 ports to your desktop computer, with a maximum data transfer rate of 10 Gb/s. It provides a fast and efficient solution for transferring large files and documents. Upgrade your desktop effortlessly and enjoy increased data transfer speeds with this reliable PCIe card.
Features:
- Bandwidth: 10 Gb/s
- Connection: PCIe x4
- PCI Version: PCIe 3.0
- Chipset: ASM3142
- Standard: USB 3.2 Gen 2
- Supported Operating Systems: Windows 8 / 8.1 / 10 / 11, Linux
- Color: Green
- Dimensions (W x D x H): 80 x 58 x 30 mm
- Weight: 32 g.
9. Conceptronic PCI interface card - PCMCIA
This PC card interface for desktops creates a PCMCIA or Cardbus socket in a PC. It supports all types of PC cards, such as wireless, network, modems, Bluetooth, Firewire, etc.
10. Conceptronic PCI Express Card 4-Port DB9 Adapter USB 2.0
The 4-port DB9 RS232 serial PCIe card features four serial ports and provides an easy expansion for additional devices. The serial ports support the RS-232 protocol with a transmission speed of up to 115200 bps and also support hardware and software flow control.
