Best selling Metrology from PCE Instruments
This page always stays fresh and updates automatically.
1. PCE Instruments PCE-EMD 10 Panelmeter 0 to 99.9 % rH
The built-in measuring instrument can be connected to up to four external temperature and humidity modules. The temperature measurement range for the sensors of the built-in measuring instrument is 32.0 - 122.0 °F, and the humidity measurement range is 0.0 - 99.9 % r. H. The power supply is provided via a mains connection of 110 - 220 V AC. The integrated sensor supply can power the connected sensors with 12 or 24 V DC. Once the sensors are connected, they are automatically recognized by the built-in measuring instrument. Communication between the sensor modules and the built-in measuring instrument occurs via an analog 4 - 20 mA signal. If multiple sensors are connected, the average measurement value of all sensors is displayed. Thus, the built-in measuring instrument is used in event halls, restaurants, or public buildings to monitor environmental conditions. The installation of the built-in measuring instrument and the sensor module is done on a wall. If necessary, the built-in measuring instrument can be mounted on a monitor bracket with mounting dimensions of 75 x 75 mm for optimal alignment. Optionally, the built-in measuring instrument can be equipped with an ISO calibration certificate.
2. PCE Instruments PCE-PA 8000 Mains analyser
HVAC measuring device PCE-PA 8000 with data storage on SD card and PC interface. With the ammeter PCE-PA 8000, it is possible to measure and record power in single-phase and three-phase circuits. Long-term measurements can be conducted with the ammeter PCE-PA 8000. The measurement data is stored on a plug-in SD card in XLS format, allowing for convenient evaluation on a computer. The recording interval can be freely selected from 2 to 7200 seconds. The energy meter can perform energy measurements as well as determine the power factor and phase angle. The current clamps of the power analyzer PCE-PA 8000 are suitable for conductor diameters of up to 50 mm. Thus, the measuring device is optimal for use in the energy supply network. The large 3.7-inch display allows for reading all measurement values at a glance, providing a quick analysis of the current measurements and an overview of current, voltage, and the power consumed.
3. PCE Instruments Flow meter Heat meter
The ultrasonic flow meter is required for control measurements or for quickly determining the flow rate in a pipeline, making it a portable and easy-to-install measurement system. The ultrasonic flow meter operates based on the time-of-flight difference method. The measurement principle of the flow meter is quite simple. When measuring at an angle in a pipe with the flow, it takes less time than when measuring against the flow. The stronger the flow, the longer it takes to measure against it and the faster it is with it. Therefore, the difference between the flow times with and against the flow directly depends on the flow velocity. The flow meter uses this effect to determine flow velocity and flow rate. Electroacoustic transducers (piezoelectric effect) send and receive short ultrasonic pulses through the medium flowing in the pipe.
4. PCE Instruments Strommessumformer
The PCE Instruments current measuring transducer PCE-P17I is a highly advanced isolation converter specifically designed for the galvanic separation of 0 to 20 mA signals. With a mounting width of only 6 mm, this device is ideal for DIN rail mounting, saving valuable space in control cabinets. The isolation converter ensures that signals are safely separated from one another, preventing measurement errors caused by signal overlaps. This is particularly important when multiple grounds are connected, as this can lead to inaccurate measurement values. The PCE-P17I enables precise signal processing, especially in combination with the PCE-P18, and ensures reliable data transmission to downstream devices such as the PCE-KD5. The operation of the isolation converter is possible under extreme conditions of -20 to 65 °C and a relative humidity of up to 95%, making it a robust solution for various applications in measurement technology.
- Galvanic separation of 0-20 mA signals
- Space-saving DIN rail mounting with 6 mm width
- Prevention of measurement errors due to signal overlaps
- Robust at -20 to 65 °C and 0-95% relative humidity.
5. PCE Instruments Heizhaube
The PCE Instruments heating mantle PCE-HM 10000 is a powerful device specifically designed for heating samples and liquids in laboratory environments. With a maximum temperature of 450 °C and a power output of 1200 watts, it allows for efficient and uniform heating of liquids in round-bottom flasks with a capacity of up to 10,000 ml. The heating mantle is equipped with a crocheted net that securely holds the round-bottom flask and ensures easy handling. It is ideal for various applications in chemical and physical research where precise temperature control is required. Operating conditions range from 5 to 40 °C with a relative humidity of 0 to 90%, making the heating mantle a versatile tool in different laboratory settings. Its compact design and user-friendly operation make it a valuable addition to any lab.
- Maximum temperature of 450 °C for versatile applications
- Powerful 1200 watt heating elements for rapid heating
- Suitable for round-bottom flasks with a capacity of up to 10,000 ml
- Easy handling with integrated crocheted net.
6. PCE Instruments Ford Becher zur Messung der Viskosität
The Ford cup for measuring viscosity from PCE Instruments is a precise measuring device specifically designed for determining the viscosity of liquids. With a measurement range of 25 mm²/s to 120 mm²/s, this outflow cup is ideal for less viscous liquids. The cup is made of high-quality stainless steel and complies with ASTM D1200, ASTM D333, and ASTM D365 standards, ensuring reliable and standardized measurements. The outflow time ranges from 40 to 100 seconds, allowing for quick and efficient application. The Ford cup is easy to handle and features a robust construction suitable for use in various environments. It is an essential tool for laboratories and industrial applications where the viscosity of liquids needs to be measured accurately.
- Measurement range of 25 to 120 mm²/s for precise viscosity measurements
- Made from durable stainless steel for longevity
- Complies with ASTM D1200, D333, and D365 standards
- Easy handling with an outflow time of 40 to 100 seconds.
7. PCE Instruments Trennwandler
The configurable isolating converter from PCE Instruments is a highly advanced solution for processing electrical signals. It functions both as a signal doubler and as a signal converter for process signals, supporting inputs of 4-20 mA and 0-10 V DC. With two outputs, one fixed at 4-20 mA and the other configurable to either 4-20 mA or 0-10 V DC, this measuring transducer offers flexibility for various applications. The quadruple isolation between the power supply, input signal, and outputs protects against ground loops and voltage spikes, ensuring the integrity of the signals. The simple configuration via a keypad accessible behind the front cover allows for quick adjustments. Additionally, a password feature provides extra protection for the configuration. This isolating converter is ideal for industrial use and can be tailored to specific requirements.
- Signal doubler and converter for flexible applications
- Two outputs: 4-20 mA and 0-10 V DC
- Quadruple isolation for protection and signal integrity
- Easy configuration with password protection.
8. PCE Instruments Rund - Probenschneider
The PCE-FSC 10 round sample cutter from PCE Instruments is a precise measuring device designed for the quick and efficient extraction of samples from various materials such as non-woven fabric, paper, leather, textiles, and cork. With a compact and robust steel housing, this sample cutter offers high durability and user-friendliness. The four internal stainless steel blades allow for a sample with an area of 10 cm² to be cut within seconds. A simple quarter turn is all it takes to remove the sample, which can then be measured for its area weight. This device is ideal for professionals who need to conduct precise material analyses while valuing efficiency and quality.
- Robust steel housing for high durability
- Four internal stainless steel blades for precise cuts
- Suitable for materials up to 5 mm thick
- Easy handling with just a quarter turn
- Ideal for extracting 10 cm² samples.
9. PCE Instruments Digitalmanometer
Digital manometer PCE-DPG 6 pressure sensor for water and gases with 1/4 NPT threaded connection, adjustable backlighting, PEAK function, and battery status indicator. The pressure sensor of the PCE-DPG series is well-suited for monitoring and displaying air pressure and water pressure. Thanks to its high measurement resolution and accuracy, this pressure sensor is versatile. The current pressure is displayed as a value and simultaneously as a bar graph. The PEAK function allows the operator to see the highest and lowest measured pressure at the push of a button. With a large 2.5" display, almost all measurement values can be read directly. Possible adjustable units include Mpa, bar, Kpa, mH2o, kg/cm², psi, mmH2o, in.WC, and mbar. The response time of the pressure sensor is under 50 ms. The connection to the process is made via a 1/4" NPT connection. Typical application areas include suction control, leak testing, or pressure monitoring.
10. PCE Instruments PCE-SG antifreeze refractometer
Measuring device for determining the antifreeze content in aqueous solutions. With this measuring device, you can quickly and accurately determine the antifreeze content in your systems and machines. This handy refractometer is used in both industrial applications and the automotive sector. Simply place a small amount of the liquid on the prism, close the lid, and read the scale to see if you have reached sufficient antifreeze for the selected liquid. If necessary, add a bit more and then conduct a new test with the measuring device.
Product order
See all products