
C2G 2.1 m Cat6a unshielded (UTP) flat Ethernet patch cable with snap-in lug protection - yellow
U/UTP, CAT6a, 2.10 m
On this page you’ll find a ranking of the best Network cables from C2G. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
The Cat6a unshielded (UTP) flat network patch cable with latch protection is the perfect solution for high-density installations, such as in large conference rooms and data centers. The molded protective cap for the latch prevents unwanted snagging during installation and provides additional strain relief. It is available in various colors, allowing you to easily color-code your network installation.
This network cable supports Ethernet speeds of up to 10 Gbps at distances of up to 100 meters, making it ideal for large conference rooms where HDBaseT technology may be used. The Cat6a technology doubles the minimum bandwidth of previous Cat6 cables and is five times more powerful than Cat5e. This increase in data speed and bandwidth is perfect for the use of PoE (Power over Ethernet) and VoIP (Voice over Internet Protocol).
The use of 28 AWG conductors allows for greater flexibility in tight installations, where space is always a critical factor. This reduced diameter provides a smaller cable surface area, allowing for better airflow compared to standard Cat6 cables. Last but not least, these cables come with a lifetime warranty, so you can always have peace of mind.

C2G 2.1 m Cat6a unshielded (UTP) flat Ethernet patch cable with snap-in lug protection - yellow
U/UTP, CAT6a, 2.10 m
Perfect for your home office or a large installation project, the enhanced Cat5E 350MHz snagless patch cables from Cables To Go distribute data, voice, and video. These cables handle bandwidth-intensive applications up to 350MHz and meet all Cat5E TIA/EIA standards. The molded, snag-free boot prevents unwanted cable tangles during installation and provides additional cable protection. The 350MHz snagless patch cables from Cables To Go are available in various colors to easily color-code your network installation.

The Cat6a unshielded (UTP) flat network patch cable with latch protection is the perfect solution for high-density installations, such as in large conference rooms and data centers. The molded protective cap for the latch prevents unwanted snagging during installation and provides additional strain relief. It is available in various colors, allowing you to easily color-code your network installation.
This network cable supports Ethernet speeds of up to 10 Gbps at distances of up to 100 meters, making it ideal for large conference rooms where HDBaseT technology may be used. The Cat6a technology doubles the minimum bandwidth of previous Cat6 cables and is five times more powerful than Cat5e. This increase in data speed and bandwidth is perfect for the use of PoE (Power over Ethernet) and VoIP (Voice over Internet Protocol).
The use of 28 AWG conductors allows for greater flexibility in tight installations, where space is always a critical factor. This reduced diameter provides a smaller cable surface area, enabling better airflow compared to standard Cat6 cables. Last but not least, these cables come with a lifetime warranty, ensuring you can have peace of mind at all times.

C2G Câble de raccordement Ethernet fin Cat6a non blindé (UTP) avec protection anti-accrochage de 0,6 m -
U/UTP, CAT6a, 0.60 m
This OM3 duplex multimode fibre optic cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has an LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other critical areas. It also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, as well as 10 gigabit Ethernet applications.

This shielded Cat-6a patch cable with protective cap is ideal for use with 10GBase Type T ports and devices such as network adapters, hubs, switches, routers, and DSL/cable modems. It also protects a connection of a 10-gigabit high-speed network from noise and electromagnetic interference. This cable handles bandwidth-intensive applications for voice, data, or video distribution and significantly reduces both impedance and structural return loss (SRL). Each patch cable has been fully tested and meets the ANSI/TIA 568 C.2 Cat6a component specifications.
Each of the twisted pairs is bonded together to maintain the twist spacing throughout the cable up to the connection point. It is made from high-quality cable and connectors. This design minimizes near-end crosstalk (NEXT) levels. The molded protective cap for the latch prevents unwanted snagging during installation and provides additional strain relief. It is available in various colors to easily color-code your network installation. Each cable is labeled with its length for ease of use.
- Protects 10-gigabit data transmissions from 10GBase Type T ports in interference-prone environments.
- The latch with protective cap safeguards the clips during plugging and unplugging.
- Shielded standard RJ45 connectors and shielded twisted pairs.
- Available in 4 colors for network color coding.
- Available in lengths of up to 30 meters.

C2G Cat6a Booted Shielded (SSTP) Network Patch Cable
S/FTP, CAT6a, 20 m
Meets all Cat-6 TIA/EIA-568-2.1 standards (version 9) and significantly reduces both impedance and structural return loss (SRL) compared to standard 100 MHz wire. Each of the separated pairs is bonded together to maintain the twist spacing throughout the cable up to the connection point. Due to its design with high-quality cable and a shortened connector, near-end crosstalk (NEXT) levels are reduced. The molded protective cap for the latch prevents unwanted snagging during installation and provides additional strain relief. It is available in various colors, allowing you to easily color-code your network installation.

C2G Network cable
UTP, CAT6, 0.30 m
C2G Cat5e Non-Booted Unshielded (UTP) Network Patch Cable - 1.5 m - green.
Type: Patch cable - CAT 5e
Technology: UTP cable
Wiring scheme: T568B
Wires per cable: 8 wires
Performance features: Stranded, Uniboot
Length: 1.5 m
Connector: RJ-45 - male (both ends)
Colour: Green
General information:
Type of network cable: Patch cable - CAT 5e
Technology: UTP cable
Wiring scheme: T568B
Cable sheath material: PVC
American Wire Gauge (AWG): 24
Wires per cable: 8 wires
Pairs per cable: 4 two-wire conductors
Coated plug: Gold
Performance features: Stranded, Uniboot
Length: 1.5 m
Colour: Green.

C2G Cat5e Non-Booted Unshielded (UTP) Network Patch Cable
CAT5e, 1.50 m
More space for your information to travel faster. Designed to handle the high bandwidth requirements of transmitting video, audio, and data, Cat6 is the next generation of network cables. The molded, snag-free boot prevents unwanted cable tangles during installation and provides strain relief. It is a perfect replacement for your Cat5E cable when it no longer supports the necessary bandwidth to transfer information to and from your personal computer or network. The Cables To Go Cat6 550MHz snag-free patch cables are available in a variety of colors to easily color-code your network installation.

C2G Cat6 Booted Unshielded (UTP) Network Patch Cable
U/UTP, CAT6, 7 m
The Cat6a unshielded (UTP) flat network patch cable with latch protection is the perfect solution for high-density installations, such as in large conference rooms and data centers. The molded protective cap for the latch prevents accidental snagging during installation and provides additional strain relief. It is available in various colors, allowing you to easily color-code your network installation.
This network cable supports Ethernet speeds of up to 10 Gbps over distances of up to 100 meters, making it ideal for large conference rooms where HDBaseT technology may be used. The Cat6a technology doubles the minimum bandwidth of previous Cat6 cables and is five times more powerful than Cat5e. This increase in data speed and bandwidth is perfect for the use of PoE (Power over Ethernet) and VoIP (Voice over Internet Protocol).
The use of 28 AWG conductors allows for greater flexibility in tight installations, where space is always a critical factor. This reduced diameter provides a smaller cable surface, allowing for better airflow compared to standard Cat6 cables. Last but not least, these cables come with a lifetime warranty, ensuring peace of mind at all times.

C2G Cavo patch di rete Ethernet sottile Cat6a antigroviglio, non schermato (UTP) da 0,3 m - Grigio
U/UTP, CAT6a, 0.30 m
The Cat6a unshielded (UTP) flat network patch cable with latch protection is the perfect solution for high-density installations, such as in large conference rooms and data centers. The molded protective cap for the latch prevents unwanted snagging during installation and provides additional strain relief. It is available in various colors, allowing you to easily color-code your network installation.
This network cable supports Ethernet speeds of up to 10 Gbps over distances of up to 100 meters, making it ideal for large conference rooms where HDBaseT technology may be used. The Cat6a technology doubles the minimum bandwidth of previous Cat6 cables and is five times more powerful than Cat5e. This increase in data speed and bandwidth is perfect for the use of PoE (Power over Ethernet) and VoIP (Voice over Internet Protocol).
The use of 28 AWG conductors allows for greater flexibility in tight installations, where space is always a critical factor. This reduced diameter offers a smaller cable surface area, enabling better airflow compared to standard Cat6 cables. Last but not least, these cables come with a lifetime warranty, so you can always have peace of mind.

C2G 0.3 m Cat6a unshielded (UTP) flat Ethernet patch cable with snap-in lug protection - orange
U/UTP, CAT6a, 0.30 m