Best Value products in the Network switches category
On this page you'll find a ranking of the best Value products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Value PoE+ Gigabit Ethernet Switch, 8+2 Ports
Gigabit Ethernet switch with PoE functionality for small to medium network environments. In addition to its Gigabit Ethernet switch capabilities, the device provides stable PoE power to your connected network devices, such as network cameras, access points, IP phones, and more. It features 8x 10/100/1000 Mbps PoE ports and 2x 10/100/1000 Mbps uplink ports. Supports IEEE802.3af/at on 8 ports. Includes automatic detection for PoE and power. Switch bandwidth: 18 Gbps. MAC addresses: 8K. Store-and-forward switching. Status LEDs (Power, Link/Act). Metal housing. Power supply (220-240 V AC).
2. Value PoE 10/100 Sw. 8x+ 1xGiga+1xSFP
Gigabit Ethernet switch with PoE functionality for smaller or medium-sized network environments. In addition to its switching function, the device converts standard 230V AC into low-voltage DC, which can be used over existing LAN cables for PoE powering of devices such as workgroup switches, network cameras, access points, and IP phones.
Features:
- 8x 10/100/1000 Mbit/s PoE (PSE) ports
- 1x 1000Base-Tx and 1x 1000Base-Fx (SFP) uplink
- Supports 8 ports of IEEE802.3af/at with up to 30W output power per port
- Supports automatic detection for PoE and power
- Switch bandwidth: 20 Gbit/s
- MAC addresses: 4K
- Store-and-forward switching
- Status LEDs (Power, Link/Act)
- Metal housing
- Power supply via external power adapter (48V, 2A DC).
3. Value PoE+ 2.5 Gigabit Ethernet switch
2.5 Gigabit Ethernet switch with 8 ports (including 4 PoE+ ports and 4 PoE ports) and 1 uplink port (for SFP+) for smaller or medium-sized network environments. The switch can be used as a central switch for smaller networks as well as for large networks at the edge (Access Layer). 8x 2.5 Gbit/s ports, 1x 10G (SFP+) uplink. Supports 4 ports of IEEE802.3bt (PoE+) with up to 90W output power per port and 4 ports of IEEE802.3af/at (PoE) with up to 30W output power per port; the total power consumption of the switch is limited to 150 watts. All ports feature up to 6kV surge protection and are safeguarded against overvoltage and overcurrent. Supports VLAN, QoS, and PoE detection (automatically detects the powered port, identifies a dead device, and reboots the device after a power failure). Non-blocking switch architecture, all ports support wire-speed forwarding. Plug & Play, store-and-forward switching.
