Best Alphacool products in the PC component tool category
On this page you'll find a ranking of the best Alphacool products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Alphacool Measuring tool
For measuring the distances between the fittings you wish to connect. You can also connect the measurements to each other or mount them on the bending plate to transfer measurement results.
2. Alphacool Bending plate
Alphacool Eiskoffer - Bending Plate
Alphacool now offers the bending plate as a separate component. Perhaps one bending plate is too small to design your entire system in a 3D model. With a second, third, or even fourth bending plate, you can assemble, bend, and design your unique system as a whole.
3. Alphacool Spacer M5 12/10
For the assembly of the start stop, straight feeder with pin stop, multi-bending feeder, circular arc feeder, flex bending feeder, 45°+90° bending feeder, measurements, and angle tongues on the ice box bending plate.
4. Alphacool HardTube Bending Kit Basic V.2
Bending Hardtubes Made Easy
With the Alphacool HardTube Bending Kit Basic V.2, nothing stands in the way of your next water cooling project with hard tubes. Bending and aligning is incredibly easy with this kit, making it no longer a hurdle in water cooling construction.
The kit includes everything you need for bending your tubes. With the Alphacool acrylic tube and hose deburring tool, you can easily straighten the ends of the tubes and remove sharp edges. The Alphacool Icebox HardTube Saw Guide allows for precise cuts without the tube slipping or getting scratched. The Alphacool pull saw for acrylic/PETG tubes lets you cut tubes effortlessly, as the saw blade is specifically designed for this purpose.
The Alphacool Acrylic Tube Double Bending Tool 12/14/16 mm can bend hard tubes with a thickness of 12, 14, and 16 mm, as the name suggests. Radii of up to 180° can be easily achieved. With the Alphacool Silicon Bending Insert 100 cm with 10 mm and 13 mm diameters, your tubes remain stable during the bending process and do not collapse, which would look unsightly and affect the appearance in the case.
Technical Details
- Color: Black, Blue
- Compatibility: Hardtubes
- Possible Tube Sizes OD: 12, 14, 16 mm
- Possible Tube Sizes ID: 10, 13 mm
- Maximum Bending Radius: 180°
- Delivery Contents:
- 1x Alphacool HardTube Bending Kit Basic V.2
- 1x Alphacool acrylic tube and hose deburring tool
- 1x Alphacool Icebox HardTube Saw Guide
- 1x Alphacool Acrylic Tube Double Bending Tool 12/14/16 mm
- 1x Alphacool pull saw for acrylic/PETG tubes
- 1x Alphacool Silicon Bending Insert 100 cm with 10 mm diameter
- 1x Alphacool Silicon Bending Insert 100 cm with 13 mm diameter.
5. Alphacool 11641 pliers hose cutting pliers
With the Alphacool Eistools Modding Cutter, you get a tool for versatile use. You can use it to cut the Alphacool ice tubes PETG HardTubes as well as normal tubes. Thanks to the adjustable angle, the Eistools Modding Cutter can also be used for various purposes in modding.
No more sawing PETG tubes? The Alphacool PETG ice tubes are relatively soft for HardTubes and can be bent at low temperatures. They can also be cut perfectly with the Eistools Modding Cutter. Simply place the tube on the protractor and cut through it like scissors. The procedure is just as easy with normal tubes.
What is the angle? Those who want to enhance their water-cooled PC through modding will not only install HardTubes but also modify various aspects of the case and other components. Many items need to be cut, including strips for cables, insulation, and various caps to cover certain parts in the PC. Specific angles are often required to ensure everything fits.
How to use the angle? The support surface is generously sized, and the angle can be adjusted up to a cutting edge of 45°. This is done in 15° increments, with the angle snapping cleanly into place and remaining in position.
What if the blade is blunt? You can easily replace the blade by loosening a screw on the side. An 8 mm open-end wrench is recommended for this. Then, you can replace the blunt blade with a new one. Replacement blades are also available from Alphacool, with the replacement blades for the Eistools Modding Cutter identified by the manufacturer number 11642.
The Eistools Modding Cutter is an essential tool for all water cooling enthusiasts. It is versatile and makes cutting the ice tube PETG HardTubes a breeze.
6. Alphacool Coolplex Plexiac mounting screws M4
To screw a Coolplex to a case wall, these robust M4 screws are required. The head of the screw is concealed within the pipe clamp, while a washer and nut can be placed on the other side. Also compatible with the Plexiac. Only compatible with the new transparent holder clamps.
7. Alphacool Icebox
High-quality tool set for working with 13 or 16 mm hard tubes, tools and angles in a stylish tool case.
8. Alphacool Radiator fan mounting screw M3 x 15 mm - 4 pcs
9. Alphacool Ice case - hexagon socket head M3
M3 hexagon socket Angle alignment from: 45??+90?? Bending feeder Manual.
10. Alphacool Ice case - Angle feeder 16mm in 45??
Bending feeder in two versions for three-dimensional bending of tubes with a diameter of 16 mm. The horizontal angle is freely adjustable by 180 degrees. To adjust, loosen the rear M4 screws using the enclosed hexagon socket, set the required angle using the 1-degree scale, and then tighten the screws again. Select the correct version according to the diameter of your chosen pipes. Manual included.
