Best Phobya products in the PC component tool category
On this page you'll find a ranking of the best Phobya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Phobya Screw Kit for Mainboards (6mm Type)
With this screw set from Phobya, you have one less problem when installing your motherboard. Everything you need is included, and the installation is quick and easy.
- 20 x 5 mm coarse thread screws (Phillips)
- 20 x 5 mm fine thread screws (M3) with 6 mm spacers with internal coarse thread.
2. Phobya Molex Extractor Kit (Sleeving tool)
With these tools, you can disconnect the pins from your power connectors to replace them with another model or to sleeve the cables.
Contents: 1x Universal Molex Extractor, 1x Fan Extractor and Floppy Cable, 1x Auxiliary Extractor, and 1x ATX Extractor.
3. Phobya Home and hobby
The home and hobby tool set is ideal for household use when a cabinet door is rattling or when glasses need to be adjusted.
4. Phobya Mainboard screw kit Black Edition
With this screw set from Phobya you have one problem less when mounting your mainboard.
Everything you need is included and the assembly is done quickly.
10 x 5mm fine thread screw (cross recess)
30 x 5mm coarse thread screw (cross recess)
110 x 10mm coarse thread screw (cross recess)
10 x 4mm coarse thread screw with 8mm spacer
5. Phobya Screw UNC 6-32 x 35 cross (4xpcs) black nickel
Cross-slot screws for mounting fans on radiators. The special UNC thread, from the non-metric unit system, has been specifically designed for radiators from the USA or the United Kingdom. They form an intermediate size between M3 and M4 threads. With a flat, slightly larger head, the screw sits very well and can also cover larger holes that may be present with various fan types. Therefore, they not only serve a structural function but are also visually appealing and look nice after installation. The thread length has been kept intentionally short to prevent damage to the fins from over-tightening during the installation of the fan, cover, or housing with the radiator. Nevertheless, we would like to emphasize checking the length of the screw before installation!
Important: These screws should only be used in combination with a 25 mm fan, as the screws are too long for narrower fans and can damage the radiator. For narrower fans (20 mm), the screw fits again when used with a fan cover.
Compatibility: XSPC, Swiftech, and others.
Technical details:
- Material: Brass, black nickel plated
- Shaft length: 35 mm
- Thread length: 8 mm
- Head height: 3 mm
- Wrench size: 6 mm
Delivery includes: 4x Phobya screw UNC 6-32 x 35 cross - black nickel
Caution: Over-tightening can damage the radiator, so please pay attention to the correct length of the screws. These screws may not be suitable in every case.
6. Phobya Fan screws, 4 pieces (small) black
The fan screws are used to mount fans, either individually or with fan grills, to a case. The self-tapping threads are suitable for almost any type of fan. The recessed cross slot allows for easy handling during installation.
Technical details:
Material: Metal
Color: Black
Dimensions (D x L): 5 x 10 mm
Head: Cross slot
Delivery includes:
4x Fan screws - Black.
7. Phobya Screw UNC 6-32 x 30 cross (4xpcs) black nickel
Phillips screws for mounting fans on radiators. The special UNC thread, from the non-metric system of units, are specially designed for the radiators from the USA or United Kingdom. They form an intermediate size from M3 to M4 threads. Due to the flat, slightly larger head, the screw fits very well and can also cover larger holes that are present in the various types of orifice plates. So they have not only a constructive function, but are also optically and also later, after mounting, very nice to look at. The thread length was kept extra short, that by carelessness of the assembly of fan, screen or housing with the radiator the damage of the fins by too deep reindrehen is prevented. Nevertheless, we would still like to point out to check the length of the screw before mounting! Important: These screws should only be used in combination with a 25mm fan, because the screws for the narrower fans are too long and then damage the radiator. If a fan shroud is used with narrower fans (20mm), then of course these will fit again. Compatibility: XSPC, Swiftech and others. Technical details: Material: brass, black nickel-plated Length shaft: 30mm Thread length: 8mm Head height: 3mm Wrench size: 6mm Included in delivery: 4x Phobya screw UNC 6-32 x 30 cross - black nickel Attention: screwing in too far can damage the raditor, make sure the screws are the correct length. Not in every case these screws are suitable.
8. Phobya Screw UNC 6-32 x 5 cross (4xpcs) black nickel
Cross-recessed screws for mounting fans on radiators. The special UNC thread, from the non-metric unit system, is specifically designed for radiators from the USA or the United Kingdom. They form an intermediate size between M3 and M4 threads. With the flat, slightly larger head, the screw sits very well and can also cover larger holes that may be present with different types of covers. Therefore, they not only serve a structural function but are also visually appealing and look nice after installation. The thread length has been kept intentionally short to prevent damage to the fins from over-tightening during the installation of the fan, cover, or housing with the radiator. However, we would like to emphasize checking the length of the screw before installation!
Compatibility: XSPC, Swiftech, and others.
Technical details:
Material: Brass, black nickel plated
Shaft length: 5 mm
Thread length: 5 mm
Head height: 3 mm
Wrench size: 6 mm
Delivery includes: 4x Phobya screw UNC 6-32 x 5 cross - black nickel
Caution: Over-tightening can damage the radiator; please pay attention to the correct length of the screws. These screws may not be suitable in every case.
