Best selling PoE injector from Zyxel
On this page you'll find a ranking of the best Zyxel products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Zyxel POE12-30W
Power-over-Ethernet Adapter. 802.3af/at PoE 30 Watt. Max. PoE power per port: 30 W. RJ-45 speed: 2.5 Gbit/s. The PoE12-30W is a multi-gigabit PoE injector that supports network speeds of up to 2.5 Gbps. It is permissible to connect powered devices (PDs) using existing cables with Cat 5e or higher. The PoE12-30W complies with PoE standards and has a PoE power budget of up to 30 watts. Additionally, it offers interoperability and compatibility with other standard-based PoE devices. Power over Ethernet (PoE). With Power over Ethernet, you can power compatible devices through the network cable. This significantly reduces cabling efforts, especially for end devices like wireless access points, IP phones, and IP cameras, while providing high flexibility in device placement. 802.3at PoE. The IEEE 802.3at standard provides a maximum of 25.4 watts of power per PoE port with a voltage of up to 50 volts. The standard assumes that after line losses, 21.90 watts of usable power remain or may be drawn to avoid exceeding the maximum power output. For PoE, a Cat5e/6 cable with a maximum length of 100 m is recommended.
2. Zyxel 1G Ethernet Outdoor PoE+ Extender IP55 rated
The PoE12-3PD is a Gigabit PoE extender designed for point-to-multipoint PoE applications. It effortlessly extends the range of power and data connections when your devices are far from a power source or PoE switch. It features four RJ-45 Gigabit Ethernet ports and provides a PoE++ input port with up to 60 W power consumption, as well as three PoE outputs for your devices. Connecting through a PoE switch instead of a power supply allows for better visibility for network management to cover the edge of your network. It has three PoE+ ports to power a variety of PoE devices, including IP cameras, VoIP handsets, IoT devices, sensors, PoE switches, and wireless access points. The PoE12-3PD is suitable for both private and commercial network environments.
3. Zyxel POE12-60W-EU0101F
Power-over-Ethernet Adapter. 802.3af/at/bt PoE 60 Watt. Maximum PoE power per port: 60 W. RJ-45 speed: 5 Gbit/s. The PoE12-60W is a multi-gigabit PoE injector that supports network speeds of up to 5 Gbps. It is permissible to connect powered devices (PDs) using existing cables with Cat 5e or higher. The PoE12-60W complies with PoE standards and has a PoE power budget of up to 60 watts. It offers interoperability and compatibility with other standard-based PoE devices. Power over Ethernet (PoE) allows compatible devices to be powered through the network cable. This significantly reduces cabling efforts and enables high flexibility in the placement of end devices, especially for devices such as wireless access points, IP phones, and IP cameras. 802.3bt PoE. The IEEE 802.3bt standard is also known as Four-Pair Power over Ethernet (4PPoE) or PoE. By utilizing all available pairs for power transmission, PoE increases the power output to 70 to 100 watts. The idea behind this is to power the entire workstation through the data cable, allowing energy-efficient computers with monitors and phones to operate over a single LAN cable.
4. Zyxel PoE12-90W PoE Injector MultiGig 1/2.5/5/10Gb Single
Zyxel's PoE injectors meet the increasing demand for connections to high-speed network devices such as WiFi 7 and WiFi 6 APs, surveillance PTZ cameras, and modern POS terminals. The PoE12-30W supports network speeds of up to 2.5 Gbps, while both the PoE12-60W and PoE12-90W support network speeds of up to 10 Gbps. The PoE12-30W complies with the IEEE 802.3at PoE+ standard, while the PoE12-60W and PoE12-90W comply with the IEEE 802.3bt PoE++ standard, providing PoE power budgets of up to 30 W, 60 W, and 90 W, respectively. They ensure interoperability and compatibility with other standard-based PoE-enabled devices.
