Best Delock products in the SSD + Hard drive accessories category

On this page you'll find a ranking of the best Delock products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Delock Mounting set 31 pieces for M.2 SSD / module

Delock screws fixing set 31 pieces for M.2 SSD modules.

2. Delock 5.25? Removable rack for 8 x M.2 NVMe SSD with Slim SAS

This solid metal exchange frame from Delock is designed for installation in a 5.25" bay of a PC, IPC, or server case and allows for the operation of up to 8 M.2 NVMe SSDs. To ensure maximum speed at each connection, each slot features its own Slim SAS SFF-8654 connector.

Quick SSD Replacement
Thanks to the special mechanism, the SSDs can be quickly and easily swapped out. For example, backups can be removed and stored in a secure location.

Tray with Lock and Suspension
To ensure that only authorized personnel can remove the hard drive, the exchange frame is equipped with a key lock. The sturdy metal carrier has springs on the top and bottom that absorb vibrations, thus supporting use in mobile devices.

Note
It is important to ensure that the tray is fully inserted, as otherwise no connection to the SSD can be established.

Technical Specifications
Connections:
Internal: 8 x M.2 Key M Slot
External: 8 x Slim SAS SFF-8654 4i Socket, 2 x 4 Pin Power Connector

- Compatible with PCI Express V4.0
- Interface: PCIe / NVMe
- Supports M.2 modules in sizes 2280, 2260, 2242, and 2230 with Key M or Key B+M based on PCIe
- Maximum height of components on the module: 1.5 mm, use of double-sided populated modules possible
- 8 x LED display
- 3 x fans
- Bootable, from UEFI version 2.3.1
- Metal M.2 tray
- Supports NVM Express (NVMe)
- Supports S.M.A.R.T.
- Key-lock
- Dimensions (LxWxH): approx. 174 x 145 x 40 mm

System Requirements
- Linux Kernel 6.2 or higher
- Windows 10/10-64/11
- Windows Server 2022
- An available Slim SAS SFF-8654 connection for each M.2 slot
- Power supply with a free SATA power connector

Package Contents
- Exchange frame with 8 x M.2 slot
- 2 x SATA 15 Pin to 4 Pin Floppy Socket cables, length approx. 12 cm
- 2 x keys
- 8 x screws. 

3. Delock 2.5″ Converter SATA 22 Pin > M.2 NGFF

Delock 2.5 inch converter SATA 22-pin > 1 x M.2 Key B - 7 mm. The Delock converter enables the connection of an M.2 SSD in 2280, 2260, 2242 and 2230 format and can be used as a replacement for a 2.5″ hard drive. The converter can be integrated into the system internally via the SATA 22 pin interface. 

4. Delock Dual Dockingstation

This HDD docking station from Delock is designed for the external connection of two 2.5" or 3.5" SATA HDDs via the USB interface. With this solution, you do not need an external enclosure, as the HDD is directly inserted into the docking station. Additionally, the cloning function allows the contents of one hard drive to be copied to another hard drive without the use of a PC. 

5. Delock HDD installation kit, 2.5" HDD in 3.5"

With this Delock mounting frame, you can install a 2.5-inch drive such as an HDD or SSD in an available 3.5-inch bay in your PC.

6. Delock Docking and cloning station 64098 for 5x 2.5 SATA HDD / SSD

This HDD/SSD docking station from Delock is designed for the external connection of up to four 2.5" SATA HDDs/SSDs via the USB interface, as well as for easy drive swapping through hot swapping. Additionally, it is possible to connect a single hard drive to the computer using the eSATA port. Up to five HDDs or SSDs can be used simultaneously, and access to them can occur at the same time. With the cloning function, the contents of an HDD/SSD can be copied to one or more drives without the need for a PC. Thanks to the USB connection and the included USB cable, the docking station can be easily connected to the computer. Furthermore, the included power supply ensures adequate power for the installed storage devices. 

7. Delock USB Type-C converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with clone function

This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD in 2280, 2260, 2242, and 2230 formats, and a 2.5 or 3.5 SATA HDD or SSD via the USB interface.

Clone function without PC
The integrated clone function allows you to clone storage without the use of a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.

Specifications
Connectors:
- 1 x USB 10 Gbps USB Type-C socket
- 1 x M.2 Key M slot
- 1 x SATA 6 Gb/s 22 pin socket
- 1 x DC power socket
Chipset: JMicron JMS581D
Supports M.2 modules in 2280, 2260, 2242, and 2230 formats with Key M or Key B+M on PCIe (NVMe) basis
Maximum height of the components on the module: 1.5 mm, use of double-sided modules possible
For 2.5 and 3.5 SATA HDDs/SSDs
Supports NVM Express (NVMe)
Supports S.M.A.R.T.
Supports TRIM
Supports Native Command Queuing (NCQ)
Data transfer rate up to 10 Gbps
Supports UASP
7 x LED display for power, access, and copy status
Bootable
Function keys:
- 1 x clone button
- 1 x on/off switch
- 1 x switch for clone mode
Dimensions (LxWxH): approx. 107 x 35 x 24 mm
Hot Plug, Plug & Play

Power supply specification
Plug-in power supply unit
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
Output: 12 V / 3 A
Earth outside, plus inside
Dimensions:
- Inside: ø approx. 2.5 mm
- External: ø approx. 5.5 mm
- Length: approx. 10 mm

System requirements
- Android 11.0 or higher
- Chrome OS
- Linux kernel 5.15 or higher
- Mac OS 12.4 or higher
- Windows 10/10-64/11
- iPad Air (4th generation) or higher
- iPad Pro (3rd generation) or higher
- Surface Pro 7
- PC or notebook with a free USB Type-A port or
- Device with a free USB Type-C port or with a free Thunderbolt 3 or Thunderbolt 4 port

Package contents
- USB Type-C converter
- Cable USB-C plug to USB-C plug, length approx. 80 cm
- Cable USB-C plug to USB Type-A plug, length approx. 80 cm
- 3 x rubber nipples
- External power supply 12.0 V / 3.0 A
- Operating instructions. 

8. Delock Docking and cloning station Dual Sata HDD / SSD

With this dual docking station, you can transfer the contents of hard drives from all common SATA HDDs and SSDs in 2.5" and 3.5" form factors without having to install the drives in the PC or access an external enclosure. The connection to the computer is made via a USB 3.1 Type-C port (Gen. 2), allowing you to utilize the full data transfer rate of the SATA standard (6 Gbps).

Additionally, the clone function enables you to copy the contents of one hard drive to another at the push of a button without the need for a PC. 

9. Delock M.2 Key M to U.2 SFF-8639 NVMe adapter

This adapter from Delock can be used to connect a U.2 SSD directly to an M.2 slot, such as on a mainboard, in 2260 format.

Connectors: 1x 67 Pin M.2 Key M male, 1x U.2 SFF-8639 female, 1x SATA 15 Pin power male.
Interface: PCIe / NVMe.
Form factor: M.2 2260.
Compatible with PCI Express V4.0.
Bootable.
Supports NVM Express (NVMe).
Length without connectors: Data cable approximately 50 cm, power cable approximately 15 cm.

System requirements:
- Linux kernel 5.4 or higher
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2016
- One free M.2 interface with Key M. 

10. Delock 64069

This converter from Delock allows for the installation of an M.2 PCIe NVMe SSD in 2280, 2260, and 2242 formats and can be connected to a PC or laptop via USB. Due to the USB-A connector and the direct installation of the SSD on the board without a case, the Delock converter can be excellently used as testing equipment. 

See all products