Best selling Storage water coolers
Here’s a ranking of the best selling Storage water coolers. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. Alphacool HDX Apex M.2 2280 SSD Cooler
The Alphacool HDX Apex M.2 2280 water cooler ensures that your SSD receives adequate cooling, allowing it to utilize its full potential. With active water cooling, the generated heat is absorbed and dissipated even faster. This results in improved performance and stability when transferring large amounts of data.
You can cool all M.2 2280 SSDs with the HDX Apex M.2 2280, whether they are single-sided or double-sided. Installation is straightforward; you simply need to apply the thermal pads and slide the SSD into the holder. With the two G1/4 threads, you can then integrate the cooler into your loop.
Technical Details:
- Dimensions: 67.99 x 25.6 x 16.8 mm (W x H x D)
- Material: Copper, Acetal
- Weight: 43 g
- Color: Black
- Supported M.2 SSD Length: 2280 (22 x 80 mm)
- Thermal Conductivity of Thermal Pads: 3 W/mK
- Operating Temperature: max. 60 °C
- Pressure Tested up to: 0.8 bar
- Delivery Includes:
1x Alphacool HDX Apex M.2 2280 SSD Cooler - Acetal
1x Thermal Pad Set
1x Mounting Material.
2. Alphacool HDX Apex M.2 2280 SSD Cooler, ARGB
The Alphacool HDX Apex M.2 2280 water cooler ensures that your SSD receives adequate cooling and can utilize its full potential. With active water cooling, the generated heat is absorbed and dissipated even faster. This results in improved performance and stability when transferring large amounts of data.
You can cool all M.2 2280 SSDs, whether single-sided or double-sided, with the HDX Apex M.2 2280. Installation is straightforward; you simply need to apply the thermal pads and slide the SSD into the holder. The two G1/4 threads allow you to integrate the cooler into your loop afterward.
RGB lighting as far as the eye can see. The digitally addressable RGB LED lighting adds a nice touch and connects via a JST 3-pin connector to the included adapter, which then connects to a motherboard or RGB controller. Additional ARGB components can be connected to the remaining connector on the adapter.
Technical details:
- Dimensions: 67.99 x 25.6 x 16.8 mm (W x H x D)
- Material: Copper, Acrylic
- Weight: 43 g
- Color: Black, Transparent
- Supported M.2 SSD length: 2280 (22 x 80 mm)
- Thermal conductivity of thermal pads: 3 W/mK
- Operating temperature: max. 60 °C
- Pressure tested up to: 0.8 bar
- Delivery includes:
- 1x Alphacool HDX Apex M.2 2280 SSD cooler - Acrylic
- 1x Thermal pad set
- 1x Mounting material.
3. Bitspower Memory cooler, ARGB - transparent 8-pack
Very fast RAM tends to get warmer. With this Bitspower RAM cooler, you can achieve cool temperatures and create headroom for extensive overclocking. The heatsink efficiently cools eight RAM modules of your choice and is easy to integrate into your water cooling loop.
To install the 16 heatsinks made of anodized aluminum, you first need to remove the standard heatsinks from your RAM. Pre-cut thermal pads are included for the mounting process. Once you have assembled the individual RAM modules, you just need to screw on the Bitspower DIMM block and connect it to your cooling loop - done!
The DIMM block is made of machined acrylic glass and features two internal threaded connections with G1/4 inch. The bottom is made of nickel-plated copper to ensure good thermal conductivity. The integrated DRGB lighting is powered by a 3-pin RGB connector, allowing for synchronization of lighting effects through your motherboard.
Technical details:
- Dimensions (per set): approx. 125 x 40 x 47 mm (W x H x D)
- Material: anodized aluminum, acrylic, nickel-plated copper
- Color: Black
- RAM compatibility: All types of (DDR-)SDRAM (DDR/DDR2/DDR3/DDR4) with memory chips on both sides of the PCBs (double-sided)
- Delivery includes: 16x RAM heatsinks for four memory modules, 2x Bitspower DIMM blocks, 2x O-rings, thermal pads, mounting screws.
4. Graugear Heat sink SSD M.2NVMe for PS5
The new Graugear cooler G-PS5HS01-Cov reduces the temperature of your M.2 NVMe SSDs in your PlayStation 5, contributing to a longer lifespan for your storage. The performance of your M.2 NVMe SSDs is also positively impacted by the heat pipe cooler, as cooler temperatures prevent thermal throttling. Maximum performance is ensured by the 7 mm copper heat pipes, copper fins, and aluminum heatsink. The cooler is suitable for use with M.2 SSDs in the PlayStation 5.
Technical details:
- Dimensions: 177 x 76 x 20 mm (L x W x H)
- Copper fins: 44 x 14 x 3.5 mm
- Weight: approx. 70 g
- Color: Silver
- Compatibility: M.2 SSD (2280) / PlayStation 5
- Package contents:
- 1 x G-PS5HS01-Cov
- 1 x Aluminum dust cover
- 4 x Thermal pads
- 1 x Screwdriver
- 1 x Screw set
- 1 x Manual.
5. Jonsbo M.2 SSD passive cooler
The Jonsbo M.2 SSD cooler is a passive cooling solution for next-generation form factor SSDs. It is no secret that especially modern M.2 NVMe SSDs can get quite warm under demanding use, which may even lead to throttling of the drive's speed. To counter this issue and ensure full performance, the professionals at Jonsbo developed a compact passive cooler that significantly reduces the temperatures of an M.2 SSD.
Overview of the Jonsbo M.2 SSD cooler:
- Gray passive cooler for M.2 SSDs
- Subtle and elegant design
- Cooler temperatures to prevent throttling
- Compatible with M.2 NVMe SSDs (2280)
- Easy installation
Details of the Jonsbo M.2 SSD cooler:
The SSD passive cooler ensures stable operating temperatures and also looks stylish. The thoughtful design of the cooler consists of a front cover and a backplate. Included are two thermal pads and the screws needed to attach the heatsink to the SSD.
It is important to note that the Jonsbo M.2 SSD cooler is only compatible with single-sided M.2 SSDs that are 22 millimeters wide and 80 millimeters long, as well as M.2 connections (NGFF) that have a height of 4.2 millimeters.
Technical details:
- Dimensions: 76.3 x 23.2 x 17.4 (L x W x H)
- Color: Gray
- Compatibility: all single-sided M.2 NVMe SSDs (22 mm wide & 80 mm long), M.2 (NGFF) connection must have a height of 4.2 mm.
6. Alphacool 11435 Computer cooling system part/accessories
The Alphacool Eisblock HDX-3 water block offers outstanding cooling for your M.2 SSD. Continuous, substantial data transfer can dramatically lower the performance of an M.2 SSD without cooling, potentially reducing performance to as little as 10% of its actual capability. Transferring large amounts of data heats up the memory controller and chips until a safety mechanism activates, severely throttling the SSD’s performance. This issue can be mitigated by actively cooling the SSD. After developing the HDX M.2 water block for motherboards with M.2 slots and the passively-cooled HDX-2 PCIe water block, Alphacool has advanced further with the Eisblock HDX-3 to provide a water cooling solution to this problem.
The M.2 SSD is secured onto a PCIe card and then mounted onto the water block. The water block is constructed from nickel-plated copper with a screwed-on acetal lid. Water flows over the entire SSD within the block, ensuring optimal heat transfer away from the M.2 SSD. Using G1/4” connectors, the water block can be connected to any standard water cooling loop.
The PCIe card is inserted into a 4xPCIe slot and secured to the case. It allows data to be transferred at speeds of up to 3900 MB/s, which is significantly faster than most SSDs can utilize. This represents a 600% improvement over conventional 2.5” SATA-SSDs, whose maximum bandwidth is 640 MB/s. Even compared to motherboard slots, the plug-in card combined with the water block offers substantially higher transfer rates. M.2 SSDs on motherboards are often connected to a 2xPCIe slot, which halves the maximum data transfer rate. Additionally, it is challenging to adequately cool an M.2 SSD on a motherboard, as the graphics card is typically mounted directly above or below it, generating significant heat in the surrounding area.
With the Alphacool Eisblock HDX-3, you can avoid these issues and achieve optimal performance from your M.2 SSD.
7. EKWB EkWaterBlocks EK-RAM Monarch Module
The EK-RAM Monarch is a cooling solution for Corsair's Dominator and Dominator GT series memory modules, designed to cool the RAM with water. To install it, the existing heatsink on the RAM modules must be removed and replaced with the EK-RAM Monarch modules. A EK-RAM Monarch cooler can then be screwed onto the threaded fittings on the EK-RAM Monarch modules, enabling water cooling for the memory modules.
Technical Specifications:
Dimensions: 123 x 35 mm (L x H)
Material: Nickel-coated aluminum
Color: Nickel
RAM Compatibility: All types of SDRAM (DDR/DDR2/DDR3/DDR4) with memory chips on both sides of the PCB. Support for single-sided RAM modules is only available with optional 1.5 mm thick thermal pads (not included) to compensate for the height of the absent memory chips on one side of the PCB.
EK-RAM Cooler Compatibility: EK-RAM Monarch (X2/X4)
Package Contents: 2x RAM adapters for two memory modules (4x individual plates), thermal pads, mounting screws, 2 mm hex key.
8. EKWB EK-RAM Monarch modules
With the various versions of the EK-RAM Monarch, EK Water Blocks has a cooler series in its range that can be used to provide excellent water cooling for Corsair's Dominator series of storage bars.
For this purpose, however, it is necessary to unscrew the attachment on the RAM modules to give way to the water coolers. Then the heat of the Corsair DIMMs is transferred directly to the Water Blocks via their rear edge.
In addition, the original heatsinks surrounding the Dominator bars transfer heat from the PCB to the top-mounted EK cooler. As good as this system works with the Corsair memory, it was unfortunate in the past that other manufacturers' DIMMs could not be cooled by EK WB.
With this additional kit from EK Water Blocks, this is finally possible. A total of four black plates made of anodized aluminum are included in the delivery, two of which each include a RAM bar. They have threads at the top so that an EK RAM Monarch cooler can be screwed on.
In total, two DIMMs per kit can be equipped, whereby all common DDR2/3 modules are supported, which are equipped with memory chips on both sides (double-sided). For latches in single-sided design, thicker thermal pads (1.5 mm) would have to be used than those included in the scope of delivery.
Note: To use the adapter boards, any original heat sinks that may be present must be removed from the RAM latch to be cooled, which will result in the loss of the manufacturer's warranty.
9. Alphacool HDX Pro Water - M.2 NVMe 2280 SSD - MCX Version
M.2 SSDs have become standard equipment for PCs. Their high transfer rates and extremely low access times enable faster and more efficient work or gaming on the PC. To ensure that you can consistently utilize the full performance of the M.2 NVMe SSD, Alphacool offers the HDX Pro Water M.2 NVMe 2280 SSD cooler (MCX version). It is a sensible addition to any water cooling system and ensures that the M.2 SSD can unleash its full potential.
Why use an active M.2 cooler? Due to their design, M.2 SSDs can only achieve their maximum performance for a short period. The controller chip heats up extremely quickly and soon begins to throttle the performance of the M.2 SSD to prevent overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds. For read operations, throttling usually occurs a few seconds later. With the Alphacool.
Storage water coolers
−6%
EUR58,90 was EUR62,90
Alphacool HDX Pro Water - M.2 NVMe 2280 SSD - MCX Version
10. Alphacool WAR ES U-shape RAM water cooler 8-fold set
The Alphacool ES U-Form RAM water cooler was developed specifically for the high demands of high-performance RAM in server and workstation systems. Up to 8 RAM modules can be cooled efficiently with the U-shaped water cooler. Its flat design and versatile connection options make it easy to install in almost any server or workstation housing.
Reliable cooling performance is essential to avoid loss of performance, as modern RAM modules generate more waste heat. This cooler fulfills this requirement. As usual with Alphacool, this water cooler is made entirely of copper to ensure maximum cooling performance.
Installation has been designed to be as simple as possible. The RAM modules are enclosed by two nickel-plated copper plates and plugged onto the mainboard. The water cooler is then guided over the RAM modules. The inlets and outlets to the front and sides allow flexible connection to the cooling circuit. Note: This cooler is only compatible with single-row equipped RAM modules.
Technical data:
Dimensions (L x W x H): 185.26 x 62.46 x 21.50mm
Material: Copper
Weight (water cooler solo): 240g
Total weight (with RAM cooling plates): 530g
Covered RAM slots: Up to 8
Distance between cooling channels: 5.47mm
Pressure tested: 0.8 bar
Connections: 2x G1/4 in | 2x G1/4 out
Colour: Black
Warranty: 2 years.
Product order
See all products