Best selling Lighting accessories from Primo
This page always stays fresh and updates automatically.
1. Primo PRIM front part
Primo Front Panel 165mm P892
Manufacturer: Primo
Designation: Front Panel 165mm XL 200
Type: P892
Accessory/Spare Part Type: Front Panel
Accessory: yes
Spare Part: no
The XL 200 installation housing is used for the installation of LED, low-voltage halogen, energy-saving bulbs, halogen metal halide lamps, and compact fluorescent lamps. If a 165 mm round installation opening is desired, it is recommended to use the front panel with a fixed installation opening. The opening can be created after pouring the concrete using a hammer. To allow for individual drill hole openings for different lamp types or lamp sockets, a front panel with a mineral fiber board is available for the installation housing. After pouring the concrete, the alignment line can be perfectly maintained through targeted drilling.
2. Primo Extension ring
Primo Extension Ring P906
Manufacturer: Primo
Designation: Extension Ring XL 150
Type: P906
Accessory/Spare Part Type: Intermediate Frame
Accessory: yes
Spare Part: no
The extension ring can be attached to the XL 150 installation housing, providing additional installation space due to its height. Multiple extension rings can be connected together until the desired installation depth is achieved. The plug-in system allows for a quick and stable connection.
3. Primo Transformer tunnel
Primo Trafotunnel P873
Manufacturer: Primo
Designation: Trafotunnel XL 150/200/250
Type: P873
Accessory/Spare Part Type: Front Part
Accessory: yes
Spare Part: no
The universal Trafotunnel for the XL 150, XL 200, and XL 250 installation housings provides space for the installation of additional electronic components. Without space constraints, LED, low-voltage halogen, energy-saving bulbs, halogen metal halide lamps, and compact fluorescent lamps can be easily installed. The corresponding installation housings are nailed to the formwork in cast-in-place concrete or attached to the steel reinforcement with separately available wings. In the precast concrete plant, the cover is flexibly positioned on the formwork table with magnets, leaving no adhesive residue. The mineral fiber board allows for individual drilling openings, ensuring that the alignment is perfectly maintained even after pouring the concrete. The covers with a fixed installation diameter are opened with a hammer.
EAN: 4260182065303.
4. Primo Front part
Primo Front Panel XL200 P875
Manufacturer: Primo
Designation: Front Panel XL200 with Mineral Fiber Plate
Type: P875
Accessory/Spare Part Type: Front Panel
Accessory: yes
Spare Part: no
The XL 200 installation housing is used for the installation of LED, low-voltage halogen, energy-saving bulbs, halogen metal halide lamps, and compact fluorescent lamps. To allow for individual drilling hole openings for each lamp type or lamp socket, a front panel with a mineral fiber plate is available for the installation housing. After pouring the concrete, the alignment can be perfectly maintained through targeted drilling. Front panels with a fixed installation diameter are also available as an option; these can be opened with a hammer.
5. Primo Installation housing
Primo Installation Housing P872
Manufacturer: Primo
Description: Installation Housing XL 250
Type: P872
Suitable for HV lamps: yes
Suitable for NV lamps: yes
Suitable for LED lamps: yes
Suitable for lamp power: 100 W
Application: for cast-in-place concrete
Installation width: 250 mm
Installation depth: 110 mm
Max. lamp diameter: 230 mm
Material: plastic
The XL 250 installation housing is used for the installation of LED, low-voltage halogen, energy-saving lamps, halogen metal halide lamps, as well as compact fluorescent lamps. The installation housing is suitable for fixtures or speakers with a maximum installation diameter of 278 - 285 mm. An absolutely concrete-tight and safely strain-relieved conduit entry without tools is possible for conduit sizes M20, M25, M32, and M40 through Primo membrane technology. A mini transformer is located directly at the box, which can be optionally extended by 126 mm using the universal transformer tunnel P873. The optional transformer tunnel provides space for the installation of additional electronic components. The installation housings are nailed to the formwork in cast-in-place concrete or attached to the steel reinforcement with separately available wings. In the precast concrete plant, the cover is flexibly positioned with a magnet on the formwork table without adhesive residue. The mineral fiber board allows for individual drilling openings, ensuring that the alignment line is perfectly maintained even after pouring the concrete. The covers with a fixed installation diameter are opened with a hammer.
6. Primo Concrete installation housing
Primo Concrete Installation Housing P606
Manufacturer: Primo
Designation: Concrete Installation Housing XL300
Type: P606
Suitable for HV lights: yes
Suitable for NV lights: yes
Suitable for LED lights: yes
Application: for cast-in concrete
With equipment room: no
Installation width: 306 mm
Installation depth: 120 mm
Material: Plastic
The Concrete Installation Housing XL 300 without transformer is used for the installation of LED, low-voltage halogen, energy-saving lamps, halogen metal halide lamps, and compact fluorescent lamps. The fixture installation housing with a diameter of 300 mm allows for tool-free and completely concrete-tight conduit entry for pipe sizes M20 and M25 through Primo membrane technology. In the precast concrete plant or on the construction site, the covers of the installation housings are glued or nailed to the formwork. The use of a cover with a mineral fiber plate allows for individual drilling openings, ensuring that the alignment line is perfectly maintained even after pouring the concrete. The box is sealed with a metal plate for increased stability and optimal heat dissipation. Additionally, the metal plate provides maximum impact resistance.
Product order
See all products