The HSS spiral drill PointTeQ enables fast drilling in metal due to the PointTeQ design at the drill tip. Quick and easy starting is possible because the self-centering tip prevents wandering. The increased drilling rate generates less heat and wear. The PointTeQ design at the drill tip remains sharp and withstands continuous use. This drill is suitable for drilling through holes and center holes in alloyed and unalloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. The shank is cylindrical, with the shank diameter corresponding to the drill diameter. It is used with drill stands and drill drivers. There is a low risk of breakage, especially for drills with a diameter under 6 mm, as the drill is designed to have a highly elastic body. The black oxide-coated flute allows for quick chip removal. The HSS spiral drill PointTeQ is manufactured according to DIN 338. The drill is type N (small side cutting angle) with a point angle of 135 degrees. Diameters in mm: 1.0; 1.5; 2.0; 2.5; 3.0; 3.5; 4.0; 4.5; 5.0; 5.5; 6.0; 7.0; 8.0; 9.0; 10.0. Working lengths in mm: 34; 40; 49; 57; 61; 70; 75; 80; 86; 93; 109; 117; 125; 133.