Devi Heating Mat for Concrete DEVIsnow 300 2295W

Manufacturer: Devi
Description: Heating mat for concrete 400V 7.9m², 2295W
Type: DEVIsnow 300 2295W
With carrier mat: yes
Heating conductor fixation: glued
Self-adhesive: no
Connection power: 2295 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Number of cold conductors: 1
Length of cold conductor: 30000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 7.9 m²
Length: 15800 mm
Width: 500 mm
Thickness: 7.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The Devi Heating Mat for Concrete DEVIsnow 300 2295W is a ready-to-install heating mat with a connection cable, suitable for installation in reinforced concrete, screed, or sand beds. It features an additional protective sheath for use with RCD protection circuits. This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is not required.

The delivery includes factory-installed waterproof connectors and a 30 m long cold conductor. Installation is carried out according to the installation instructions. It is important to measure the insulation and total resistances. The heating cable complies with IEC 60800, has a voltage of 400 V, a nominal limit temperature of 80°C, a specific heating output of 300 W/m², a resistance tolerance of +10% / -5%, a minimum installation temperature of 5°C, a minimum bending radius of 5 x dA, and a protection class of IP X7.