Devi Thin Bed Heating Mat 150 W/m² DEVIcomfort#140F1744

Manufacturer: Devi
Description: Thin Bed Heating Mat 150 W/m²
Area: 1.5 m²
Type: DEVIcomfort#140F1744
Design: Heating foil
With carrier mat: no
Fixation of heating conductor: Glued
Self-adhesive: yes
Power: 150 W/m²
Number of cold leads: 1
Length of cold leads: 2300 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Length: 3000 mm
Width: 500 mm
Thickness: 5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Additional details:
Thin bed heating mat with a connection cable and suitable sensor protection tube with a red cap. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and was specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.5 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheathing for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.5 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 6.0 m², 0.5 x 3.0 m.