Devi heating mat DTIK-300 1050W 3.6qm

Manufacturer: Devi
Designation: Heating mat 400V for asphalt
Type: DTIK-300 1050W 3.6qm
With support mat: Yes
Fixation of heating conductor: Glued
Self-adhesive: No
Connected load: 1050 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Number of PTC thermistors: 1
Length of PTC thermistors: 10,000 mm
Suitable for damp rooms: Yes
Suitable as open space heating: Yes
Suitable as roof surface heating: No
Surface area: 3.6 m²
Length: 4,800 mm
Width: 750 mm
Thickness: 7 mm
With controller: No
With room thermostat: No
With floor temperature sensor: No

The Devi heating mat DTIK-300 1050W 3.6qm is a ready-to-install heating mat with one connection cable, suitable for embedding in asphalt pavements. The heating cable fulfills the requirements of IEC 60800 and EN 62395. It features additional protective braiding for use with the FI protection circuit, including a factory-fitted waterproof sleeve and a 10 m long PTC resistor.

Specifications:

• Voltage: 400 V
• Nominal limit temperature: 90°C
• Installation temperature: short-term 240°C
• Deformation resistance: 2000 N
• Tensile strength: 120 N
• Heating conductor insulation: FEP
• PTC resistor: 1 x 10 m 2.5mm²
• Specific heat output: 300 W/m²
• Resistance tolerance: +10% / -5%
• Minimum installation temperature: 5°C
• Smallest bending radius: 5 x dA
• Protection class: IP X7
• Surface: 3.6 m²
• Dimensions: 0.75 x 4.80 m
• Power: 1050 W.