Application:
Controlled screw tightening in the range of 20 - 100 Nm / 15 - 75 lbf·ft.
Adjustable, release-type, and robust pipe torque wrench with rectangular drive for industrial and craft use.
Design:
Classified according to DIN EN ISO 6789-2:2017 Type II Class A, calibrated to a maximum permissible deviation of +/- 3%, thus more precise than the +/- 4% required by the standard.
Includes traceable test certificate (DIN EN ISO 6789-2:2017).
For controlled right and left tightening (change tool direction by repositioning).
Rectangular drive 9x12 mm including ejector aid.
Robust, matte powder-coated steel tube construction with high-quality plastic parts.
New ergonomic handle shaped according to the natural grip position of the hand.
Clearly visible and tactile hand centering aid as well as calibration aid in the center of the handle.
Dual scale Nm / lbf·ft with vernier (Nm), enlarged viewing window protects against abrasion and contamination.
With vernier scale for Nm main scale to set scale intermediate values; lbf·ft setting only via main scale.
Vertical alignment of the scale, torque setting suitable for both left and right-handed users.
Scale mark positioned directly above the scale, preventing reading errors (parallax error).
Unit labeling integrated into the scale frame and protected against abrasion through the viewing window.
Precise release mechanism generates a clearly noticeable and audible release signal upon reaching the set torque value.
Includes roll-away protection, preventing the tool from rolling away when set down.