Switching/Shutter Actuator 2/1-fold KNX, 6A, flush-mounted. This flush-mounted switching actuator features an integrated bus coupler for controlling two socket or lighting outputs or one roller shutter/blind. For controlling lighting outputs, options include On/Off, time control, safety off, forced control, lock, logic, preset, delay function, or 64 scenes. It has a toggle function for time or duration. The shutter function allows for commands to move up/down/stop and adjust the slat angle. Percentage control of the shutter enables movement to a predefined position. The sun protection function can control brightness per room in conjunction with an external sensor. It includes an alarm function to position the shutter at a defined point. Safety descent is activated as long as the button is pressed. There is a 64 scene function per channel. A logic block controls the output based on the result of a logical connection. Preset, lock function, and forced control are also available. The device converts bus information into corresponding commands. Outputs are switched via the system line from their assigned inputs. Manual operation is possible, along with a switching status indicator using an LED and an operating hour counter per output. The device can be read using a diagnostic tool. It features a programming button and a red programming LED, with bus connection pre-wired with cable and bus terminal.