The Champion Electronic Mercato roller shutter drive is an intelligent electronic tubular motor for roller shutters up to 10 square meters. The endpoints of this roller shutter drive are set electronically via an adjustment switch or fully automatically. The drive operates whisper-quiet even under load. The (de)activatable obstacle detection and the motor's frost protection provide additional protection for your roller shutter against weather conditions and obstacles. The torque is 40 Nm, and the speed is 12 rpm. The motor is 688 mm long in total, and the motor casing has a diameter of 45 mm. It fits into standard star head clip bearings from well-known manufacturers. The supply voltage is 230 V (50 Hz), and it is classified with protection class IP 44. The roller shutter drive is delivered as standard with a 3 m connection cable and a ready-made box clip bearing. It is pre-adapted for an octagonal steel shaft with a key size of 60. With the available accessories, it can also be adapted for octagonal steel shafts SW50 and SW70, as well as some round groove shafts.