The Bolide Classic roller shutter and gate drive is a mechanical tubular motor designed for particularly large systems. The endpoints are adjusted using the included adjustment tool on the set screws at the motor head. The torque is 100 Nm and the speed is 10 rpm. The motor has an overall length of 680 mm and the motor casing has a diameter of 59 mm. It fits into any 16 mm square bearing. The supply voltage is 230 V (50 Hz) and it is classified with protection class IP44. The drive is delivered as standard with a 2.5 m connection cable and a particularly sturdy awning bearing for 16 mm square fittings. It is pre-adapted for an octagonal steel shaft with a key size of 70. With the available accessories, it can also be adapted for the octagonal shaft SW102 as well as some awning shafts.