Radio receiver. The drive can be controlled directly with a smartphone or tablet via Wi-Fi using a remote control from the Funk Mercato series or a connectable switch. It is an intelligent electronic tubular motor for roller shutters up to 7 square meters. The endpoints of this roller shutter drive can be set either via a paired remote control or smartphone. The drive operates very quietly even under load. The torque is 30 Nm and the speed is 15 rpm. The motor is 700 mm long in total and the motor casing has a diameter of 45 mm. It fits into any 10 mm square bearing (e.g., Becker, Elero) as well as into common star-head clip bearings from well-known manufacturers (e.g., Somfy). The supply voltage is 230 V (50 Hz) and it is classified with protection class IP 44. The roller shutter drive is supplied as standard with a 3 m connection cable and a finished box bearing for 10 mm square mounting. It is pre-adapted for an octagonal steel shaft with a key size of 60 mm. With the available accessories, it can also be adapted for octagonal steel shafts SW50 and SW70 as well as some round groove shafts.