High-temperature centrifugal roof fan for direct or ducted ventilation of commercial and industrial buildings. Horizontal discharge. High efficiency. Low noise level. Housing made of galvanised sheet steel. Weather protection bonnet made of aluminium with openings for motor cooling. Simple installation. The motor is located outside the air flow. Suitable for the high temperature range from +65 °C to +200 °C, radial impellers with backward curved blades made of galvanised sheet steel. Radial impellers are statically and dynamically balanced. Motor: Asynchronous three-phase motor. Protection class IP 55, two-speed, three-phase, Y/ - circuit. The temperature in the fan motor is monitored by PTC thermistors. The PTC thermistors must be connected to a tripping system that permanently disconnects the fan from the mains if the temperature is too high. Electrical connection: Connection in the terminal box on the motor. Safety instructions: The fan may only be operated if the contact protection for the impeller is guaranteed in accordance with DIN EN ISO 13857: DRD HT 75/8 2V, Flow rate: 9791 m3/h / 13055 m3/h, Speed: 720 1/min / 970 1/min, Impeller type: radial, Speed controllable: yes, Reversible: no, Voltage type: three-phase, Rated voltage: 400 V, Mains frequency: 50 Hz, Rated power: 900 W / 2200 W, INenn: 3.32 A / 6 A, Protection rating: IP 55, Thermal class: F, Pole-changing: yes, Installation location: roof, Installation position: vertical, Housing material: Aluminium / galvanised sheet steel, Impeller material: galvanised sheet steel, Colour: silver, Weight: 125 kg, Weight with packaging: 136 kg, Nominal width: 750 mm, Width: 815 mm, Height: 850 mm, Depth: 1100 mm, Width with packaging: 1150 mm, Height with packaging: 965 mm, Depth with packaging: 1150 mm, Conveying medium temperature at IMax: 65 °C to 200 °C, PTC DIN 44082: M 100.