Centrifugal fan made of plastic. High-pressure fan for industrial applications, suitable for conveying corrosive and acidic media. Designed for simple and direct installation on a pipework system. Features a low noise level and high efficiency. The motor is located outside the airflow, and the motor base made of epoxy-coated sheet steel for mounting the fan is included in the scope of delivery. The housing is made of plastic with a standard orientation of LG 270°. It is suitable for temperature ranges from -15 °C to +70 °C. The centrifugal impellers have backward curved blades made of polypropylene.

The fan is equipped with a three-phase asynchronous motor with a protection class of IP55. It operates in mode S1 (continuous operation) and has speed control capabilities with a frequency converter. The permissible frequency range for speed control with a frequency inverter is 20-50 Hz. The temperature in the fan motor is monitored by PTC thermistors, which must be connected to a tripping system that permanently disconnects the fan from the mains if the temperature is too high.

Electrical connection is made in the terminal box on the motor. The flow rate is 6700 m³/h, with a speed of 2880 1/min. The impeller type is radial, and it is not reversible. The voltage type is three-phase with a rated voltage of 400 V and mains frequency of 50 Hz. The rated power is 2200 W, with an input current of 4.3 A. The protection rating is IP 55, and the thermal class is F. The fan is not pole-changing and is designed for horizontal installation at a pipe connection.

The housing material is plastic (polyethylene), and the impeller is also made of plastic (polyethylene). The color is light grey. The weight of the fan is 51 kg, and the weight with packaging is 70 kg. Dimensions are as follows: size 350 mm, width 565 mm, height 710 mm, depth 600 mm; with packaging: width 1200 mm, height 800 mm, depth 870 mm. The fluid temperature at maximum is -15 °C to 70 °C, and it complies with PTC DIN 44082: M 100.