Branch T-piece with flanged, round, and unperforated side rails, featuring connector holes for connections and an integrated joint connector, suitable for wide-span cable trays. It is shape-stable due to a rear-mounted support profile and riveted, upward-open C-profile rungs with a slot width of 16 mm. This allows for cost-effective manufacturing of 90° T-branches and intersections, depending on width in the main direction, including hot-dip galvanized, proportionate fastening accessories. The radii of the fittings are designed to allow cable installation in accordance with DIN/VDE 0298 Part 3. Suitable clamp brackets can be found in the KI catalog. Joints must be supported by an appropriate load-bearing structure in close proximity.

Usable for:

• Wide-span cable tray WSL 200
• Wide-span cable tray WSLSN 200

Dimensions (approx. measurements):
Height H (clear internal dimension) x Width B (clear internal dimension): 201.5 x 605 mm
Notch of the wide-span cable tray: 1003 mm + B
Length in the outgoing direction: 750 mm
Inner rail radius R: 500 mm
Material: Steel, hot-dip galvanized according to DIN EN ISO 1461.