EUR196,30
Gardena RollUp
35 m
Questions about Gardena RollUp
What would you like to know?
0 questions and answers
Galaxus
8 months ago
Helpful answer
You can insert a longer hose into the Gardena RollUp hose box by replacing the existing hose with a new one. To do this, carefully remove the old hose from the hose box and roll up the new hose so that the roll-up mechanism works correctly. Please note that the hose box is designed for a specific hose length and a hose that is too long may not be able to be fully rolled up.
Automatically generated from the .
Helpful answer
I have the XL version, the housing is not big enough for the hose (but it works perfectly).
For cost reasons, it would make sense to have only one housing. A little tip - make sure the mounting is very sturdy, the hose length exerts more force than I thought.
There are various adapters for the tap... but you can't replace the hose.
Have a look at Gardena or ask there.
I assume that they are not available individually.
Yes, no problem. We first mounted the holder and then put the box on. That way you can take the box down in winter.
Only the colour differs, the price may vary accordingly. Also depending on supply and demand or availability of the goods.
24 months guarantee (bring-in).
That sounds like a defect to me.
Helpful answer
I doubt it, given its weight and the forces it undergoes when the pipe is pulled and turned. You'd have to go through the insulation to reach the concrete or brick, which I finally decided not to do ... I'm not too keen on the idea of damaging my insulation.
Kind regards.
Helpful answer
I think that if you take care to open the casing carefully (watch out for the spring system) it should be possible. I've had 2 of these for more than 10 years, and as winter approaches I take them in and periodically, once they're completely unrolled, I spray the inner shaft and the winding system with VD40.
The only difference between the two models is the colour of the outer ring. It is turquoise on one model and white on the other. Apart from that, the items are identical.
The hose installed inside the box is designed for the volume available. It would not be wise to change it.
Risk of hose blockage.
is the same product, only costs more in blue
Unfortunately, we cannot offer the wall bracket separately. However, it is available directly from the manufacturer under the spare part number "18620-00.600.11". Please contact Gardena via the following link: https://help.gardena.com/hc/de.
yes you can. there should be no problems.
According to the manufacturer's specifications, these are the dimensions of the item:
Width: 54 cm
Depth: 23.5 cm
Height: 46.5 cm
I took it grey
Galaxus
7 months ago
Helpful answer
Yes, the hose from the tap to the RollUp hose box can be extended. To do this, you can use an additional hose section and attach it with a hose clamp. It is important that the hose is compatible with the connections of the GARDENA system to ensure a secure connection. Alternatively, you can also use a GARDENA Repairer to extend the connection hose.
Automatically generated from the .
Galaxus
8 months ago
Helpful answer
Yes, you can extend the connecting hose. To do this, you can use an additional piece of hose and attach it with a hose clamp. It is important that the hose is compatible with the connections of the GARDENA system to ensure a secure connection.
Automatically generated from the .
Helpful answer
The wall bracket of the roll-up wall hose boxes M/L, L and XL now have 3 holes for screw fastening. The hole pattern of the two upper screws corresponds to the roll-up automatic wall hose boxes 25 and 35 (up to year of manufacture 2020). Only the 3rd centre, lower hole needs to be re-drilled.
Galaxus
10 months ago
Helpful answer
You should not mount the product "RollUp (25 m)" from Gardena directly on a façade wall with insulation to avoid damaging the insulation.
It is advisable to use a special pillar or post to which you can attach the hose box. Such a pillar protects the insulation of the wall and provides a flexible and stable mounting option for the hose box.
The wall bracket supplied is designed for normal wall mounting, but a separate pillar is the better solution for walls with insulation.
Automatically generated from the .
Unfortunately I can't say, as I have attached the roll-up to a steel girder.
30 of 61 questions