Designed to accommodate high tensile loads, with additional load capacity in horizontal directions. Depending on the load, it is possible to install 2 or 4 rafter anchors per connection. The position of the connectors is variable due to the double-row hole pattern on each leg. The SPF rafter anchors are used for the tensile anchoring of intersecting timbers. They can also absorb horizontal forces. Depending on the load, 2 or 4 rafter anchors are used per connection. When using 2 anchors per connection, 2 left or 2 right connectors are required, as they should be arranged diagonally opposite each other to ensure central load introduction. It is important to consider and, if necessary, demonstrate the transverse tensile stress on the timbers.