Best selling Hazard detectors from Ei Electronics
This page always stays fresh and updates automatically.
1. Ei Electronics Rauchwarnmelder 10er Set
The Ei Electronics Ei650 smoke alarm is a reliable security system that comes in a practical set of 10. These battery-operated detectors are specially designed for indoor use and offer an effective way of detecting potential fire hazards at an early stage. With an integrated 10-year battery, they guarantee long-term use without frequent battery changes. The visual warning signals and the high sound power level of 85 decibels ensure that attention is quickly drawn to the danger in an emergency. Compatibility with smart home systems enables easy integration into existing security solutions without the need for an additional hub. This set is ideal for households that prioritise security and prevention.
2. Ei Electronics Rauchwarnmelder
You can rely on the Ei650W smoke alarm. Whether stand-alone or networked with other Ei Electronics components, the detector impresses with maximum reliability - from the moment it is commissioned until the end of its service life. To ensure that alarms are triggered throughout the entire house, the smoke detector can optionally be networked by radio; the Ei600MRF radio module is available separately. Thanks to its long-lasting 10-year battery, the fire alarm provides reliable protection against fire hazards for the full 10-year service life. The device, which is manufactured in the EU, checks every 10 seconds whether there are smoke particles in the room air. As soon as this is the case, the smoke alarm device warns you immediately with its integrated 85 dB(A) piezo alarm. And because nothing is more annoying than frequent false alarms, the Ei650 is protected against disruptive incidents with soiling compensation. In addition, it does not require an LED or annoying flashing light and is completely suitable for use in bedrooms.
3. Ei Electronics Radio module incl. 10 year bat
For installation in smoke detectors of the series Ei650W, Ei650iW, Ei650C, and Ei650iC, as well as in heat detectors of the series Ei603TYC. This device is used for networking smoke detectors and heat detectors and operates at a radio frequency of 868 MHz, features individual house coding, and has an easy input function.
4. Ei Electronics Ei208D Carbon monoxide alarm
It is invisible, odorless, and tasteless: Carbon monoxide (CO) is a dangerous respiratory poison that is produced during the incomplete combustion of carbon-containing materials. What helps here is to buy a CO detector. A carbon monoxide alarm like the Ei208D from Ei Electronics provides the only effective protection against potentially fatal CO poisoning. This detector, designed for a lifespan of 10 years, checks the CO levels in the surrounding air every 4 seconds and reliably warns as soon as danger arises. The use of such a CO detector is particularly sensible in places where combustion appliances such as fireplaces, pellet stoves, briquette heaters, oil heaters, gas boilers, gas heaters, or instantaneous water heaters are used. The battery-operated Ei208D is designed as a CO alarm for flexible installation in living spaces and can also be used in recreational vehicles such as motorhomes, caravans, or boats. If the electrochemical sensor of the Ei208D detects elevated CO levels, the integrated LCD display of the alarm provides specific instructions on how to best respond to the danger.
What our customers think
Pro
- No extra battery required for operation
- Battery life
- Easy to initialise
Contra
- somewhat large
- Permanently installed battery
- No display visible (not as in the photo)
5. Ei Electronics Ei650iW
Suitable for use in a wireless network (only with Ei650M or Ei600MRF radio modules). 3-volt lithium battery (permanently installed), battery life of at least 10 years. Equipped with a diagnostic light and AudioLINK function. Radio module is not included.
What our customers think
Pro
- Works perfectly
- Easy assembly
- very loud, can be heard in an emergency
6. Ei Electronics I-series Ei650i
The smoke detector Ei650i is suitable for use in privately occupied living spaces or rooms with similar residential use. The smoke alarm operates on the light scattering principle and is equipped with a built-in 10-year lithium battery.
What our customers think
Pro
- Works perfectly
- Easy assembly
- very loud, can be heard in an emergency
Contra
- At most, it's a bit clunky
- must be replaced after 10 years
7. Ei Electronics Ei414RF - 868.499 MHz - 100 m - AC - 230 V - 0 - 40 °C - 0 - 35 °C
The Ei414 can deliver either a pulse signal or a continuous switching signal through the relays to the universal transmitters. A dip switch also allows for a delayed timed response. The specific signal type is determined by the requirements of the OEM universal sensor.
The Ei414 contains three mains voltage relays (up to 250V AC / 5 Amperes). The relay contacts operate with mains power or with battery backup in the event of a power failure.
The Ei414 features a 3-way key switch. In the "On" mode, the Ei414 responds to a "Fire" or "CO" signal. In the "Off" mode, the Ei414 does not respond to RadioLINK signals. In the "Test" mode, the Ei414 only responds to a "Test Signal" or a "Repeated Remote Test Signal" (e.g., from an Ei450 or Ei412). Upon receiving a test signal, the corresponding relay (Fire or CO) is activated. Upon receiving a repeated remote test signal, the fire relay is activated.
The Ei414 uses RadioLINK multi-repeater, multi-path technology to ensure very robust and reliable RF signal coverage. Although it is primarily designed for interfacing with a Warden Call or similar telecare system, the versatility of the electrically isolated contacts of the Ei414 means that it can also be used to switch many other OEM devices.
Hazard detectors
EUR198,87
Ei Electronics Ei414RF - 868.499 MHz - 100 m - AC - 230 V - 0 - 40 °C - 0 - 35 °C
8. Ei Electronics Fernbedienung Ei450
Radio remote control for early warning systems consisting of smoke, heat and carbon monoxide detectors. Scope of delivery: Alarm controller, mounting plate, 3 V lithium battery, operating instructions.
9. Ei Electronics Ei650+ML-3X179 Smoke alarm incl
The Ei Electronics Ei650+ML-3X179 smoke detector is a reliable safety device designed for indoor use. With a built-in 10-year battery, this smoke detector offers a long-term and low-maintenance solution for fire protection. The acoustic alarm signals in the event of smoke development, providing an early warning. The smoke detector can be mounted on either the ceiling or the wall, allowing for flexible installation. Thanks to its compact design, the device blends harmoniously into any living environment. Additionally, the Ei650+ML-3X179 alerts you when the battery is low, ensuring you are always on the safe side. This smoke detector is an essential addition to any home to ensure the safety of its occupants.
- Integrated 10-year battery for long-term use
- Acoustic alarm in case of smoke development
- Flexible mounting on ceiling or wall
- Low battery warning for added safety.
10. Ei Electronics Radio module
The EI3000MRF-1XD wireless module from Ei Electronics is an innovative accessory for 230V smoke detectors in the Ei3000 model series. It enables seamless integration into existing smoke detector systems and offers enhanced functionalities that increase safety and user-friendliness. The power supply is provided directly through the smoke detector, eliminating the need for an external power source. The module supports features such as wireless range monitoring and data retrieval, allowing for easy maintenance and monitoring of the system. With a lifespan of up to 10 years, the wireless module is a reliable solution for indoor use that complies with the Radio Equipment Directive 2014/53/EU. - Wireless range monitoring to ensure signal strength - Head-removal function for easy maintenance - Easy-entry for straightforward installation - Data retrieval with RF tool for system monitoring - Compatible with the Ei3000 model series.
Product order
See all products