Best Wantec products in the Home security accessories category

On this page you'll find a ranking of the best Wantec products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Wantec 2wIP E Adapter PoE screw terminal switch side/transmitter

With the 2wIP, a network connection can be established over a 2-wire line. Power over Ethernet (PoE) is also transmitted, allowing PoE devices (e.g., IP cameras, SIP phones, IP door intercoms) to operate without additional power supply. The 2wIP E-series provides a bandwidth of up to 200 Mbit/s over 2-wire or coaxial lines.

- Cable length up to 1500 m for coax, 600 m for twisted pair or doorbell wire
- Transmission speed up to 200 Mbit/s per line
- Multiport: a 1-port transmitter can control up to 4 receivers, while the 4-port transmitter can control up to 8 receivers
- PoE with up to 38 watts per receiver
- PoE function on the receiver device can be disabled
- No programming required for basic configuration, plug and play, just plug it in and it works
- Naturally works with SIP phones, access points, etc.

Connection setup:

- Establish a 2-wire connection between the transmitter and receiver, connect in a bus system, and observe polarity.
- Plug the end device into the 2wIP receiver.
- Connect the 2wIP transmitter to the network switch using a patch cable.
- Connect the power supply to the 2wIP transmitter, then plug the power plug into the socket.
- Done, the transmitters and receivers configure themselves. 

2. Wantec 5711 - 10,100 Mbps - 10/100 - IEEE 802.3af,IEEE 802.3at - Full - Half - 1200 m

Wantec 5711. Ethernet LAN data transfer rates: 10,100 Mbps, Cabling technology: 10/100, Network standard: IEEE 802.3af,IEEE 802.3at. Maximum operating distance: 1200 m, Color of product: Black. Power output: 25.4 W. Width: 47.1 mm, Depth: 85.4 mm, Height: 23 mm. 

3. Wantec 2wIP-E-S-BC Adapter with BNC Switchsite

Wantec 2wIP-E-S-BC Adapter with BNC Switchsite (5803).

4. Wantec 2wIP-E-S-TW Adapter with RJ45 switch side

With the 2wIP, a network connection can be established over a 2-wire line. Additionally, PoE is transmitted over the line. The adapter is scalable, allowing one transmitter to control up to 4 receivers. Cable lengths can reach up to 1500 m with coaxial, 500 m with twisted pair, or doorbell wire. The transmission speed is up to 180 MBit/s. It is multiport, meaning one transmitter can control up to 4 receivers. PoE is available with up to 38 watts for all 4 receivers combined. No programming is required for basic configuration; it is plug and play—just plug it in and it works. Grouping and monitoring can be done via software. It also works with SIP phones, access points, computers, etc. To set up the connection: connect one 2wIP to the network switch using a patch cable, establish a 2-wire connection with the second (and third, fourth, and fifth) 2wIP, ensuring proper polarity in the bus system. Plug the end device into the second 2wIP. That's it; the transmitters and receivers configure themselves automatically. 

5. Wantec Adapter 5.5mm hollow socket to screw terminals

The Wantec adapter 5.5mm socket to screw terminals is a practical accessory for building security that enables easy connections between electrical components. With an inner diameter of 2.1mm and an outer diameter of 5.5mm, this adapter is ideal for various applications where a secure and reliable connection is required. The adapter is made with a robust design, providing a durable solution for connecting wires and electrical devices. It is particularly useful in installations where flexible wiring is necessary and allows for easy handling through the screw terminals. The Wantec adapter is an essential accessory for professionals and DIY enthusiasts who value quality and functionality.

- Easy connection through screw terminals for secure wire connections
- Robust design for long-lasting use in various applications
- Ideal for use in building security and electrical installations. 

6. Wantec 5614 BNC Terminal Black Cable interface/adapter

Adapter BNC to screw terminals. Key features: Connectors and interfaces. Connector 1: BNC. Connector 2: Terminal. Design: Product color black. Packaging content: Quantity 1. 

7. Wantec Adapter 5.5mm hollow plug to screw terminals

The Wantec adapter 5.5mm hollow plug to screw terminals is a practical accessory for building security that allows for an easy connection between a 5.5mm hollow plug and screw terminals. This adapter is particularly useful for applications such as doorbell systems and intercoms, where a reliable and secure connection is required. With a robust design and user-friendly handling, the adapter provides an effective solution for the installation and connection of electrical devices. The adapter is available in a compact format and is ideal for use in various environments where flexible wiring is needed. The use of screw terminals allows for a simple and secure connection that ensures long-term use.

- Compatible with doorbell and intercom systems
- Easy installation via screw terminals
- Robust construction for reliable connections. 

8. Wantec 2wIP-E-C-TW adapter with RJ45 client / camera side

Wantec 2wIP-E-C-TW adapter with RJ45 client / camera side (5800).

9. Wantec Monolith C flush-mounted box deep

The Monolith C flush-mounted box deep from Wantec is a high-quality accessory for the MONOLITH C Series 240, specifically designed for the installation of doorbell and intercom systems. Made from robust stainless steel, this flush-mounted box not only offers an appealing look but also ensures high durability and resilience. With a front plate size of 120x240 mm and compact dimensions of 223x103x60 mm, it is ideal for integration into various wall structures. The flush-mounted box is suitable for indoor installation and guarantees a secure and tidy setup of the corresponding devices. Its thoughtful design allows for easy handling and installation, making it a practical choice for both professionals and DIY enthusiasts.

- Made from high-quality stainless steel for durability and resilience
- Suitable for the installation of doorbell and intercom systems
- Compact dimensions for easy integration into various wall structures
- Designed for the MONOLITH C Series 240 with specific front plate size. 

10. Wantec MONOLITH B Weather protection cover f. 1-4 keys without keyboard

MONOLITH B Weather protection roof f. 1-4 keys without keyboard.

See all products