Best selling Motor controllers from Eaton
On this page you’ll find a ranking of the best Motor controllers from Eaton. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Eaton Starting system MSC-D-2,5-M7 230V
The Eaton Direct Starter MSC-D-2.5-M7 230V is a reliable motor controller designed for use in industrial applications. With a rated control supply voltage of 230 V at AC 50 Hz, this device offers an efficient solution for motor control. The direct starter is equipped with a short-circuit release that provides additional protection. The maximum rated operational power is 0.37 kW at 230 V in a three-phase system, making it ideal for various applications. The overload release is temperature-compensated and allows for a current adjustment range of 1.6 to 2.5 A, enabling precise adaptation to the specific requirements of the application. With a high protection rating of IP20, the device is suitable for use in protected environments. Installation is done via screw terminals, ensuring easy setup. The direct starter is a proven product from Eaton, known for its quality and reliability.
- Temperature-compensated overload protection for increased safety
- Conditional rated short-circuit current of up to 50,000 A
- Easy installation through screw terminals
- Suitable for use in environments with temperatures up to 55 °C
- Overload release with adjustable current range of 1.6 to 2.5 A.
2. Eaton Soft starter DS7 24Vac/dc 32A
Phase: 3
Supply Voltage: 230 → 460 V ac
Rated Current: 32 A
Operating Voltage: 460 V ac
Control Voltage: 24 V ac/dc
Power: 15 kW
Protection Class: IP20
Total Length: 45 mm
Total Width: 118 mm
Total Depth: 150 mm
Minimum Operating Temperature: 0 °C
Maximum Operating Temperature: +40 °C
Series: DS7
Soft starter devices DS7. The soft starter has increasingly established itself as an alternative to the star-delta starter. The new DS7 series combines these advantages with the Eaton xStart system. The DS7 is a fully integrated component of the xStart, and all existing components can be used. The DS7 is designed for standard applications such as pumps, fans, and small conveyors. The DS7 is also available with SmartWire-DT connection to simplify wiring and enhance functionality as an automated solution. It can be directly connected to the PKE device. Low operating frequency (5 s, 3 x Ie, 10 starts). The integrated fan eliminates restrictions. Can be used with existing Eaton products. Available from 1.5 kW to 110 kW. Options with 24 V dc as well as 230–460 V ac voltage available. DIN rail mounting or screw fastening. Can be mounted side by side without power reduction. Compact design.
3. Eaton EMS2-RO-Z-2,4-230VAC 197169 Reversing starter Motor power at 400V 0.75kW Motor power at 230V
The EMS2-RO-Z-2.4-230VAC 197169 reversing starter from Eaton is an electronic motor starter designed for direct and reversing start of three-phase motors. With a maximum rated operational power of 0.75 kW at 400 V and an overload relay setting range of 0.18 to 2.4 A, this motor starter provides a reliable solution for various applications. The safety stop with bypass ensures additional safety, while the three-phase disconnection allows for precise control. The reversing starter is designed for vertical installation and uses screw terminals for connection technology. It meets the standards IEC/EN 60947-4-2 and UL508, making it a trustworthy choice for industrial applications.
- Safety stop with bypass for increased safety
- Three-phase disconnection for precise control
- Overload relay setting range from 0.18 to 2.4 A
- Suitable for vertical installation with screw terminals.
Motor controllers
EUR309,02
Eaton EMS2-RO-Z-2,4-230VAC 197169 Reversing starter Motor power at 400V 0.75kW Motor power at 230V
4. Eaton EMS2-DO-T-9-24VDC
The EATON EMS2-DO-T-9-24VDC is an electronic motor starter designed for the direct starting of three-phase motors. With a maximum rated operational power of 3 kW, this device is suitable for a wide range of applications in industrial environments. The motor starter provides comprehensive motor protection and is equipped with a safety stop principle that allows for three-phase disconnection. The operating voltage is 24 V DC, making it a flexible solution for various control requirements. The push-in terminals ensure an easy and secure connection method. The EMS2-DO-T-9-24VDC complies with the standards IEC/EN 60947-4-2 and UL508, underscoring its reliability and safety in application.
- Maximum rated operational power of 3 kW for three-phase motors
- Overload relay setting range from 1.5 to 9 A
- Safety stop with bypass for increased safety
- Easy installation through push-in terminals
- Protection class IP20 for use in protected environments.
5. Eaton Direct starter, 380 V 400 V 415 V: 3 kW, 283146
The Direct Starter from Eaton is a reliable motor control device designed for use with motors in efficiency class IE3. With a rated operational power of 3 kW at voltages of 380 V, 400 V, and 415 V, this device offers an effective solution for controlling electric motors. The Direct Starter is equipped with an overload relay with an adjustable range from 6.3 A to 10 A, allowing for flexible adaptation to various applications. The operating voltage is 230 V at 50 Hz and 240 V at 60 Hz, ensuring broad compatibility. The device complies with the IEC/EN 60947-4-1 and VDE 0660 standards, underscoring its safety and reliability. With a compact design and an IP20 protection rating, the Direct Starter is suitable for both industrial and commercial applications.
- Suitable for motors in efficiency class IE3
- Adjustable range of the overload relay: 6.3 - 10 A
- Complies with IEC/EN 60947-4-1 and VDE 0660 standards
- Compact design with IP20 protection rating.
6. Eaton Softstarter
The Eaton soft starter is a highly advanced device for the gentle control of electric motor startups. With a rated operational current of 75 A and a rated operational voltage of 200 to 600 V AC, this product is suitable for a wide range of applications in industrial and commercial environments. The soft starter provides effective motor control that reduces the inrush current, thereby minimizing mechanical stress. Equipped with motor overload protection and an internal bypass, the device ensures reliable and safe operation. The IP20/NEMA 1 protection rating allows the soft starter to be used in protected environments. Control is achieved via a rated control supply voltage of 24 V DC, facilitating easy integration into existing systems. The soft starter is an ideal solution for anyone seeking efficient and gentle motor control.
7. Eaton EATO soft starter
The EATO Softstarter from Eaton is a highly advanced device for the gentle starting control of electric motors. With a rated current of 55 amps and a rated voltage of 230 volts, this soft starter is suitable for use in various industrial applications. It enables a controlled and smooth start of motors, minimizing mechanical stress and current spikes during the starting process. The soft starter is designed to operate within a voltage range of 200 to 480 volts AC and offers reliable performance that meets the demands of modern applications. Manufactured in Germany, the EATO Softstarter reflects Eaton's high quality standards. The device is part of the manufacturer's commitment to sustainable practices, supported by the SBTi initiative. The package includes the soft starter itself, allowing for easy integration into existing systems. This soft starter is an ideal solution for anyone seeking efficient and gentle motor control.
8. Eaton EML33
EATON EML33 soft starter options 127669.
9. Eaton EMS2-DO-T-9-SWD 192387 Direct starter Motor output at 400V 1.1kW Motor output at 230V 0.55
The EATON EMS2-DO-T-9-SWD direct starter is an electronic motor starter designed for the efficient control of three-phase motors. With a motor power of 1.1 kW at 400 V and 0.55 kW at 230 V, this device provides a reliable solution for various applications. The direct starter is equipped with a safety end stage that allows for three-phase disconnection, ensuring a high safety standard. The connection to the SmartWire-DT system enables advanced diagnostic functions and flexible adjustment of the motor current. Easy installation is supported by push-in terminals, which ensure a quick and secure connection. The EMS2-DO-T-9-SWD is designed for vertical installation and complies with the standards IEC/EN 60947-4-2 and UL508, making it an ideal choice for industrial applications.
- Built-in motor protection with safety end stage and bypass function
- Adjustable motor current via SmartWire-DT
- Easy installation through push-in terminals
- Complies with international standards such as IEC/EN 60947-4-2 and UL508
- Suitable for vertical installation with motor exit at the bottom.
Motor controllers
EUR199,–
Eaton EMS2-DO-T-9-SWD 192387 Direct starter Motor output at 400V 1.1kW Motor output at 230V 0.55
10. Eaton 192752
MSC-DM-32-M32(24VDC)_Direct starter, 380 V 400 V 415 V: 15 kW, Ir= 25 - 32 A, 24 V DC, direct voltage.
Product order
See all products