Residual-current device
−6%
EUR23,16 was EUR24,53
Schneider Electric Automatic control unit B 32A 3-pole R9F23332 Resi9
Best selling Residual-current devices from Schneider Electric
On this page you’ll find a ranking of the best Residual-current devices from Schneider Electric. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Schneider Electric Automatic control unit B 32A 3-pole R9F23332 Resi9
Schneider Electric Circuit Breaker R9F23332
Manufacturer: Schneider Electric
Designation: Circuit Breaker 3P, 32A
Type: R9F23332
Installation Depth: 44 mm
Tripping Characteristic: B
Number of Poles (total): 3
Number of Protected Poles: 3
Rated Current: 32 A
Rated Voltage: 400 V
Rated Insulation Voltage Ui: 440 V
Rated Impulse Voltage Uimp: 4 kV
Voltage Type: AC
Rated Switching Capacity Icn according to EN 60898 at 400 V: 6 kA
Frequency: 50..60 Hz
Power Loss: 3.2 W
Energy Limitation Class: 3
Flush Mounting: no
Switching Neutral Conductor: no
Overvoltage Category: 3
Degree of Pollution: 2
Additional Devices Possible: no
Width in Division Units: 3
Protection Class (IP): IP20
Ambient Temperature During Operation: -25..60 °C
Connectable Conductor Cross-section Multi-stranded: 1..25 mm²
Connectable Conductor Cross-section Solid: 1..35 mm²
Explosion Protected: no
Schneider Electric Circuit Breaker R9F23332: additional details
Resi9 circuit breaker, 3-pole, 32A, characteristic B. Switching capacity of 6kA according to IEC/EN 60898-1. Dual-function terminal for cables and fork busbar at the bottom of the device. Rear-mounted DIN rail fastening element at the bottom of the device. Spring mechanism for low-wear and user-independent switching of contacts. Color shade RAL 9003.
2. Schneider Electric Acti9 iMX tripping unit 100-415VAC
Range: Acti 9
Series: iMX
Type: Shunt release
Control voltage: 100 to 415 V AC, 110 to 130 V DC
Auxiliary contacts: Auxiliary electrical components are combined with iC60 circuit breakers, iID residual current circuit breakers, iSW-NA remotely tripped disconnect switches, RCA remote controls, and ARA automatic make contacts. They provide trip or remote indication of their position (open/closed/tripped) in the event of a fault.
Tripping auxiliary components:
- iMN: Undervoltage release
- iMNs: Undervoltage release with delay
- iMNx: Undervoltage release, independent of supply voltage
- iMX: Shunt release
- IMX + OF: Shunt release with NC/NO contact
Indicator auxiliary components:
- iOF: Normally closed/normally open contact
- iSD: Fault indication contact
- IOF/SD + OF: Normally closed/normally open contact and switchable OF or SD contact.
Residual-current device
−54%
only 1 piece on sale
EUR17,46 was EUR38,35
Schneider Electric Acti9 iMX tripping unit 100-415VAC
3. Schneider Electric Residual current circuit breaker
The residual current circuit breaker from Schneider Electric, model R9D01616, is a highly advanced device that functions as both an RCD and an MCB. This product offers a reliable protection solution for electrical installations by safeguarding against both overload and earth faults. With a rated voltage of 230 V and a rated current of 16 A, this switch is designed for use in residential and commercial buildings. The B-characteristic ensures quick tripping in case of overload, while the integrated earth fault protection with a rated residual current of 30 mA provides additional safety. The switch is suitable for an ambient temperature range of -25 to 40 °C and complies with the EN/IEC 61009-1 standard. Its compact design allows for easy installation in standard distribution boards, and the mechanical indicators for fault tripping provide clear visibility during operation.
- Integrated circuit breaker with earth fault protection
- Mechanical indicators for fault tripping
- Energy limiting class 3
- Impulse current withstand of 0.25 kA
- Suitable for use in environments with temperatures from -25 to 40 °C.
4. Schneider Electric LSwitch iC60H 3p
Acti 9 iC60H circuit breaker, 10 kA (IEC/EN 60898-1), 15 kA (IEC/EN 60947-2). 3-pole, rated current 16 A, D-characteristic, operating voltage (Ue) 380-415 V AC, insulation voltage (Ui) 500 V AC. Double connection terminal for cables and pin busbar on the top and bottom of the device. Jump switching for low-wear contact operation. Integrated insulation cover. Actuation of the DIN rail mounting element on the front of the device for tool-free installation and easy accessibility for the user. With mechanical front-side fault indication (VisiTrip) to show tripping due to overload or short circuit. Safe contact indication (VisiSafe) of the circuit breaker, with green indication ensuring voltage-free safety on the outgoing side. Tripping unit technology - thermomagnetic. Compatible with the residual current devices of the Acti 9 iID series as well as the Vigi iC60 residual current block. Additional snap-on auxiliary modules (optional) - indication of switching position, fault tripping, working current tripping, undervoltage tripping, overvoltage tripping. Color shade RAL 9003. The iC60H circuit breaker meets the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. Furthermore, this series is VDE certified.
5. Schneider Electric CUTTER ELECT A9Z64440
The Schneider Electric A9Z64440 is an all-current sensitive residual current circuit breaker (RCCB) designed for use in electrical installations. With a rated current of 40 A and a rated residual current of 300 mA, this 4-pole switch provides reliable protection against residual currents that can be caused by various electrical disturbances. The Type B-SI is particularly suitable for applications that exhibit smooth direct current residual currents, such as those generated by frequency converters or inverters. The switch operates at a supply voltage of 400 V AC and is suitable for use in single-phase or three-phase supply networks. Safety features include a mechanical fault indication (VisiTrip) and a safe contact indication (VisiSafe), which provide clear feedback on the device's status. The A9Z64440 meets relevant standards and offers easy installation as well as the option to connect additional auxiliary modules.
- Mechanical fault indication (VisiTrip) to show tripping due to residual current
- Safe contact indication (VisiSafe) to ensure voltage-free status on the outgoing side
- Double connection terminals for connection of cables or busbars from both sides
- Easy removal of the individual device with installed busbar thanks to front-accessible fastening element
- Type B-SI with integrated SI technology for greater resilience against electrical disturbances.
6. Schneider Electric SE 19071 Auxiliary switch ÃS+ÃS 220-240VAC 6A
Schneider Electric Auxiliary Switch 19071
Manufacturer: Schneider Electric
Designation: Auxiliary Switch
Type: 19071
Number of contacts as changeover: 2
Rated operational current Ie at AC-15, 230 V: 240 A
Type of electrical connection: Screw connection
Design: Integrable
Mounting type: Side mounting
Additional details: Auxiliary switch Acti 9 OF/OF. For NG125 and FI block Vigi NG125, 2W, 250V AC. 2 changeover contacts, for indicating the switching position of the NG125.
EAN: 3303430190714.
7. Schneider Electric Compact circuit-breaker
Schneider Electric Circuit Breaker C10B34V040
Manufacturer: Schneider Electric
Designation: ComPacT NSX100B Circuit Breaker
Type: C10B34V040
Rated Current Iu: 40 A
Rated Voltage: 440 V
Rated Short-Circuit Breaking Capacity Icu at 400 V, 50 Hz: 25 kA
Setting Range of Overcurrent Release: 16.2 to 40 A
Setting Range of Short-Time Delayed Short-Circuit Protection: 24.3 to 400 A
Setting Range of Instantaneous Short-Circuit Protection: 600 A
Integrated Residual Current Protection: Yes
Connection Type for Main Circuit: Screw Connection
Device Type: Built-in Device
Fixed Installation Technology: Suitable for DIN Rail Mounting: No
DIN Rail Mounting Optional: Yes
Number of Auxiliary Contacts as Changeover Contacts: 5
With Release Damper: Yes
Number of Poles: 3
Position of Connection for Main Circuit: Front
Actuation Type: Rocker Switch
Complete Device with Protection Unit: Yes
Motor Drive Unit Integrated: No
Motor Drive Unit Optional: Yes
Protection Class (IP): IP40
Schneider Electric C10B34V040 Circuit Breaker: Additional Details
This ComPacT NSX100B is a complete 3P 3d circuit breaker designed for fixed installation, aimed at optimizing space and breaking capacity. It is the optimal choice for all standard and special applications. The breaking capacity (Icu) is 25 kA rms at 415 VAC, 50/60 Hz. The operating voltage is 440 VAC 50/60 Hz. This product features a MicroLogic 4.2 Vigi electronic release system with a rated capacity of 40 A and integrated adjustable residual current protection. MicroLogic 4.2 Vigi also offers customizable long-term and short-term protection functions as well as fixed instantaneous protection. This 3-pole version (105 mm x 161 mm x 86 mm) provides a wide range of optional features and accessories. It complies with international standards (IEC 60947), CCC, EAC, and maritime regulations. The ComPacT NSX100B is part of Schneider Electric's EcoStruxure Power architecture.
8. Schneider Electric SCHN moulded-case circuit-breaker
The ComPacT NSX250H is a complete, space- and tripping-performance optimized, fixed 4P3D compact circuit breaker. It is an optimal choice for all standard and special applications. The short-circuit breaking capacity (Icu) is 70 kA rms at 415 VAC 50/60 Hz. The operating voltage is 440 VAC 50/60 Hz. This product includes an electronic MicroLogic 7.2 E Vigi trip unit with a rated current of 160 A and an integrated adjustable residual current protection. The MicroLogic 7.2 E Vigi trip unit offers adjustable long-time, short-time, and instantaneous protection. MicroLogic 7.2 E Vigi features a built-in display for fine-tuning and monitoring energy. This 4-pole version (140 mm x 161 mm x 86 mm) comes with a variety of optional features and accessories. It complies with international standards (IEC 60947), CCC, EAC, and marine specifications. The ComPacT NSX250H is part of Schneider Electric's EcoStruxure Power architecture.
9. Schneider Electric SCHNEIDER ELECT M9F11340
The Schneider Electric M9F11340 is a reliable circuit breaker designed for use in demanding industrial environments. With a rated current of 13 A and a C-characteristic, this 2-pole switch offers high protection against overload and short circuits. The operating voltage reaches up to 415 V AC and 125 V DC, while the insulation voltage is 500 V AC. The M9F11340 features easy mounting on DIN rails, secured by a clip closure. The thermomagnetic release unit ensures precise and reliable tripping in case of faults. Additionally, the jump switching mechanism allows for low-wear contact switching, which extends the device's lifespan. Optional auxiliary modules can be added to integrate additional functions such as status indication or fault tripping. The M9F11340 complies with the IEC 60947-2 standard, making it suitable for professional use.
- Thermomagnetic release unit for reliable protection
- Jump switching for low-wear contact operation
- Easy mounting on DIN rail without tools
- Additional auxiliary modules for extended functions
- High lifespan, ideal for industrial applications.
10. Schneider Electric M9F43204 M9 C60BP 2P 4A D UL489 LS switch
The M9F43204 M9 C60BP 2P 4A D UL489 LS switch from Schneider Electric is a highly advanced circuit breaker designed for use in various electrical applications. With a rated current of 4 Amperes and a D-characteristic, this switch provides reliable protection against overload and short circuit. It meets international standards IEC/EN 60947-2 and UL 489, making it a versatile solution for the global market. The switch is designed for an operating voltage of up to 277 Volts AC and offers a high insulation voltage of 500 Volts AC. Installation is simple and tool-free on a DIN rail, facilitating the setup process. Additionally, the switch allows for the connection of optional auxiliary modules for displaying switching positions and fault triggers, enhancing functionality and simplifying monitoring.
- Reliable protection against overload and short circuit
- Easy tool-free installation on DIN rail
- Meets international standards for global applications
- High insulation voltage of 500 Volts AC
- Optional auxiliary modules to expand functionality.
Product order
See all products