Wellpower Lipo batteries with an exceptional price-performance ratio! SE Series = high-quality workmanship, outstanding performance data, and the best price-performance ratio! Depending on the type, they can handle up to 100C (peak current) and charging currents of up to 8 times the nominal capacity, making our Wellpower Lipos the first choice for ambitious model builders. Balancer connector system XH. Version V2 is delivered with a specially made Liposafe tailored to the battery size (from 1000mAh) for maximum safety during transport and storage. The battery can even be installed directly in the model along with the Liposafe (note temperature development!). For budget-conscious model builders, we specifically offer the ECO Series, with slightly lower nominal load capacity and without Liposafe, but with the well-known quality features at an unbeatable price. Splitpacks have two balancer and four main current connections. Version ULTIMA with true 35C or 60C continuous load and peaks between 70C and 90C (1 sec.) or 120C (max. 0.5 sec.) for uncompromising applications such as competitions. CHECK version with a built-in LED voltage display for a quick test of the battery's charge status. Discharge currents SE/V2: Values in parentheses apply only for short-term loads (max. 5 seconds). Charging currents: CHx values indicate the maximum allowable charging current. For CH2, for example, the double value of the nominal capacity (so for a 2.0Ah battery max. 4A), CH6 the sixfold value, and so on. Tip: The maximum continuous discharge current is only recommended with active temperature monitoring! Preheating cold batteries increases performance and lifespan. Never let batteries get hotter than 60°C. Recommended storage voltage 3.70… 3.80 V / cell. Protect against short circuits, mechanical damage, overheating, deep discharge, and overcharging. Only charge on a fireproof surface with a suitable LiPo charger. Do not reuse damaged cells! Never leave charging or discharging batteries unattended!.