
be quiet! System Power 10
750 W
be quiet! System Power 10
750 W
2 months ago
The be quiet! power supply System Power 10 (450 W) is compatible with the ASUS PRIME B250-PLUS Intel® B250 LGA 1151 ATX motherboard. This ATX-format power supply provides a total power of 450 W with 80 PLUS Bronze certification, which is enough to power a system with an Intel i7 7700 processor, 32 GB DDR4 RAM, and an RX 6400 graphics card, provided that the system's total power consumption does not exceed this power. The power supply has the necessary connectors, including a 20+4-pin ATX connector for the motherboard, an 8-pin (4+4) EPS connector for the processor, and two 6+2-pin PCI-Express connectors for the graphics card, which is compatible with the RX 6400. However, you need to check that the total power consumption of all the components (processor, graphics card, peripherals) remains within the 450W limit supplied by the power supply. The RX 6400 is an entry-level graphics card with moderate power consumption, so this power supply should be sufficient for standard use with an air case and the components mentioned. In short, this power supply is suitable for your ASUS PRIME B250-PLUS configuration with i7 7700, 32 GB DDR4 and RX 6400, provided that the total power consumption does not exceed 450 W.
Automatically generated from the .2 months ago
Yes, you can use this power supply with an i7-7700. The processor has a TDP of 65 W, and the power supply provides enough power on the 12V rail (37.5 A, i.e. 450 W dedicated) for the standard components. Make sure that the graphics card and other peripherals remain within the total power limits. Technical details : - 80 PLUS Bronze certification (efficiency up to 88.5%) - PCI-Express connectors: 2x 6+2 pins for graphics card [Properties] - Protection included against overvoltage, overload and short-circuit. Check the total power consumption of your system, including the graphics card, to confirm compatibility.
Automatically generated from the .2 months ago
The CPU cable for this power supply is an 8-pin EPS connector (4+4), which means that it is compatible with configurations requiring an 8-pin connector for the processor. However, the question seems to refer to a 4-pin CPU cable, but the model mentioned uses an 8-pin connector.
Automatically generated from the .Does the NT only have a 4-pin CPU connection cable (according to the specs), not a 4+4 pin cable...?
4 months ago
The power supply only has a 4-pin CPU connection cable, no 4+4-pin cable. The internal connection options include a 20+4-pin ATX power connector, a 4-pin CPU connector, a 4-pin Molex connector, two 6+2-pin PCI-Express connectors and five S-ATA connectors.
Automatically generated from the .Yep..1!
According to research, your assumption is correct, but I would recommend that you start a Community discussion about this so that more people become aware of it and you get more input in this regard.🫡 You can start a discussion in the "PC power supply" section at the following link: https://www.digitec.ch/de/s1/community/producttype/pc-netzteil-81?tagIds=76
VGA is the same as PCIe
If something is missing from your order, please contact support.
This is an EU import, usually a CH cable is also supplied. Please report your situation to our customer service so that they can check your request and find a satisfactory solution with you. The following link will take you to our contact form: https://helpcenter.digitec.ch/hc/de/requests/new
None, everything is there.
The original power supply is in ATX format, so you can replace it with this one, which is in the same format.
13 of 13 questions