Cooler Master MasterLiquid ML360R RGB
Questions about Cooler Master MasterLiquid ML360R RGB
What would you like to know?
0 questions and answers
Hello,
Thank you for your comment. We will rectify this as soon as possible.
We apologise for the inconvenience caused and, if you haven't already done so, please contact customer service so that our staff can quickly offer you a solution: https://helpcenter.digitec.ch/hc...
It's an all-in-one system, ready to use, so you don't need an extra liquid.
Helpful answer
Yes my friend, your case has enough space on the top (3x120mm) and enough space on the front (3x120mm) so you have two places to put this 3 fan watercooling. In addition, the watercooling has adapters to fit am4 sockets and LGA1200 sockets like yours.
Hello,
394mm in length.
119mm in width.
27.2 mm in height.
250W TDP
It will fit.
Top: 3x 120 - 140mm
Front: 3x 120 - 140mm
Back: 1x 120 - 140mm
Bottom: 2x 120 - 140mm
Helpful answer
I used other coolermaster fans for both sides, yes it works! But housings or screws can sometimes not be 100% sufficient or fit if you want to equip both sides with fans, I have used for one side, for example, once short screw inserts that are usually mounted under the motherboard so that I could attach a fan side at all!
Helpful answer
hello, i bought it myself 2 weeks ago i have a i5 9600k on 5.1ghz in the desktop without applications i have around 28-30 degrees. Volume could be quieter is not the quietest but it does not bother me, the only bad thing are the cables it has a lot of cables to it which is a negative point for cable management, but with a proper case that still works. I'm really happy with the rgb, it can also be controlled with other rgb or mainboard. sorry for my bad spelling.
If you can synchronise the leds for everything as I have already done
The cooling liquid is basically already included with every AiO.
Helpful answer
Basically, thermal paste is included in the delivery. I'm not quite sure which one, but I'm guessing master gel.
Personally, I never use the paste included. Because this is often a point where the manufacturers save money.
Personally I can recommend Thermal Grizzly Kryonaut (1g, 12.50W/m K)
Or PHOBYA NanoGrease Extreme (3g, 16W/m K)
Recommend. Whereby the 2 n is a bit viscous and not so pleasant to apply. But if it's done well, it does a good job, especially on a water cooling system like this one.
If the fans are installed behind the radiator, the cooling performance could deteriorate slightly as far as I know.
In principle, this should not be a problem.
Yes, they are in.
Former employee
7 years ago
Unfortunately, it is still unclear if and when the item will be available again. However, if there is a change, we will immediately note this on the homepage next to the product.
15 of 15 questions