EUR80,09
Kingston FURY Beast
1 x 16GB, 5600 MHz, DDR5 RAM, DIMM
Questions about Kingston FURY Beast
What would you like to know?
0 questions and answers
Helpful answer
if you're lucky you'll find DDR5, but then you still have the problem that your desired CPU cooler also supports LGA1700....
Due to different purchasing conditions and changing suppliers over a certain period of time, price changes/fluctuations may occur. We generally work with daily prices. We recommend that you put the item on your watch list, then you will be informed as soon as the price drops again.
Helpful answer
According to our information, the data is correct, but it is DDR5 RAM. I will forward the incorrect information to the responsible department for revision, thank you for pointing this out!
Helpful answer
The are stable at 4800MHZ I use them with 7800X3d with EXPO Profil on at 6000MHZ Frequenz and they are stable
Helpful answer
Hello, Here it is: KF556C36BWEAK2-64
Helpful answer
Buffered and ECC are almost only available for server mainboards and Xeon processors.
I have the Prime B650-Plus motherboard and the Ryzen 9 7900 CPU with this RAM, it runs without any problems, although I run the RAM in factory settings because it's fast enough for me as it is.
Hallo, dieses Kit ist nicht Teil der QVL-Liste für diese Motherboard- und CPU-Kombination: https://www.asus.com/ch-de/motherboards-components/motherboards/proart/proart-z790-creator-wifi/helpdesk_qvl_memory?model2Name=ProArt-Z790-CREATOR-WIFI But this 128GB is: Kingston D5128GB 5200-40 Beast RGB K4 KFY (4 x 32GB, 5200 MHz, DDR5 RAM, DIMM)
That's probably the case, just let it run at 4800, that's enough😀 With your configuration, I would rather make sure you buy a smart graka🤗
Helpful answer
aaalso .... the RAM will never reach these clock rates without XMP or AMP profile. Accordingly, if you want to reach the maximum clock rate, an XMP or AMP profile (depending on the RAM and board) must be loaded. I can't tell you exactly where this is on your board. However, you should be able to set a memory timing profile or something similar somewhere. However, this has little or nothing to do with the OC itself, but is a separate setting.
Helpful answer
For me, they just barely fit under the "be quiet! Pure Rock 2 FX".
Helpful answer
No. You have to install the same ones. So 2x32 GB.
I have a tuf 670 and they run on 6000 but have had some problems, I wouldn't buy Asus again. According to the website they should also run on the B650.
We assume that there was a data entry error. Thank you very much for pointing this out. We will gladly forward this internally to the responsible department and hope that this will be adjusted in a timely manner.
Helpful answer
Just check the manufacturer's page of the mainboard to see whether 4 bars of the Ram are compatible at all. Sometimes it's only 2 bars. How much memory do the bars have? That is also very important! Good luck.....
Your PC has DDR4 RAM. This product is DDR5 RAM. This one does not fit. The PC seems to have a very new specification, so why do you need new RAM? If you only have two slots filled and you want to fill up the other two slots, you should use exactly the same ones as already installed (at least size and clock speed). To find the right ones, search for ddr4.
Helpful answer
no, because acer has installed a z-490 mainboard in your pc and this only works with ddr4 ram.
These RAM Modules support both Intel XMP Profiles and AMD EXPO Profiles with Speeds up to 5600 MHz.
Helpful answer
Due to a lot of shortages in the semmiconductor industry we can't give you any informations about the availability. The ddr5-Ram are not for sale in the meantime.
Asus can never test all Ram's from all vendors. The list is just what has been tested. Best Memory support is a continuous process, which will be kept improving by providing updated BIOS'es. Worst case is running the memory at slightly slower speed and wait for the next BIOS update.
21 of 21 questions